98 Z-71 Wrecked Drivetrain Parts
 

undefined
I have just recieved a 98 Z-71 that was a roll over. I am using the engine and wiring,ECM etc.... I will have available the transmission, transfercase, rearend, frontend, steering column, one straight bedside, recieverhitch, seats,
and whatever else I find that is servicable. The truck only has 70K miles!!!!!
Trans $400
Transfer $400
Front-end $400
Rear-end $ 400
Reciever $50
column(with key) $75
bed side $100
seats (grey cloth) $250
Suspension 4" lift Kit complete with springs $ 250
4 OEM wheels with 38 tires( from what I can tell 1 is bent) $200

I am trying to help my cousin out by parting it. I will be posting some pictures but it will probably be after Christmas. These parts are located in the Jackson MS. area. I will consider shipping some parts.

I am interested in the lift kit. PM me with specifics, brand.parts included etc...
Thanks

Also are the seats bucket or 60/40?
Push-button or manual shift 4x4?
Gear ratio?

I hadn't got the truck to my shop yet. As we say here, its out in the sticks. I only had about 10 min to glance at the whole thing. I know the seats are buckets because I wanted a 60/40 for my 67 Chev . I will check on the lift kit. I probably posted the sales ad a little early but I wanted to get the ball rolling and see if I could get some hits. I will check on it. Just give me a few days.

what transmission and transfer case does it have?

ok
 

i'm next in line for the lift, and i could use the skid plates from under the front axel and t-case.

No problem on the skid plates. $100 plus shipping. Give me a little time to get the truck in the shop to harvest all the parts.

I need the entire wiring harness minus the engine harness you are using. I need headlight and other engine compartment harness, the dash, door and seat harnesses, and I also need the front to rear harness as well.

more info on the tires!

do you by chance have the dash airbag on/off module?

How about the fuel lines front to rear?

CD Player?
Thanks,
Matthew

interested in a tilt column.

Irwin

I'm interested in the bucket seats (& console) if they are still available. I am close enough to drive and get them if they look OK.

It sounds like I have a lot of interested folks who needs the parts. It will be the first week in January before I can get the truck in the shop and start harvesting the parts. I am an High School Automotive teacher and unfortantly(yea right) we are off from the Christmas Holidays. I will, after the new year, get the parts harvested with photos for all who have inquired.

Tilt column will be $100 plus shipping.

Cd. player
 

$50 plus shipping

Tires
 

If you want the Tires with the stock wheel, I have all 4 that have less than 2 weeks of driving on them. He paid $175 a tire. I will let them go for $200 If we can figuire out how to ship.

So they are 38"s on 16" rims?

You can send me a pic of the Cd player to mkmiller@magnolia-net.com
Thanks,
Matthew

I need the dash and any other wiring you can get from it. I know you need the TBI engine and trans harness, But I can use any your not going to.

grille
 

is the grille in good shape?

Irwin you still around?

:devil: IO need the skid plate and license bracket now too :whine:

Are the doors any good?