Do they reproduce this piece?
 

I thought I'd ask before playing wheres waldo on vendors websites. This piece bolts to the rocker box on the side facing the fender.Any ideas.

I think GMCPaul's has them. Not for sure.

Nope, no repros currently produced. It took me quite a while to find one and man was I ever happy when I did.

Here is a pic you can use in a WTB post,it is a drivers side but it will help show people where this stupid part is located.

thank GeeEmm, if nothing turns up tomorrow on the phone I'll make a post.

This was covered once before and no, that piece is not currently in reproduction. Looks like a great candidate though. Perhaps if one could find a decent pair, it could be done through one of the larger venders. Doesn't look like rocket science, just a few uncommon angles and some holes. And, it is a common rustout part of the Blazer/Jimmy's. Does the rocker box have to come out to remove that piece??

Nope, I pulled it out with the rocker box still in place. Mine looks exactly like Alexis.

Rg

We made a couple for Orangeuavol's Blazer-not that hard.

Alex with the metal skills' you are learning you should be able to fab up that piece pretty easy..

time vs. everything else. if i get those pieces for reasonable price, which I got to call back to check on that. I'll buy them but if not then I'll fab it up.

We are actually looking for 1 of these so that we can send it off to be reproduced, so if anyone happens upon a drivers or passengers side rocker box forward outer block off plate thats in good condition that they do not need please let us know and we will buy it and get these made.
You can reach me at
robbinspd1199@yahoo.com
or M-F 9am-5pm EST 765-344-2906
Thanks for your help!!!
GMCPaul

I know this is old but I gave some bad info I need to correct. I did take mine out with the rocker box still in place, but only because the whole bottom of it was rusted away.

After taking a closer look at the Blazer I realized that if the piece is good it is welded between the rocker box and the rocker panel.

Sorry if I misled anyone on this.

Rg

Yup, you can kinda see 3 little tacks at the bottom of the piece in the picture I posted.