The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   Finally Pics (https://67-72chevytrucks.com/vboard/showthread.php?t=139348)

71jimmy 02-05-2005 04:15 PM

Finally Pics
 
1 Attachment(s)
Well Folks, after being on this board almost a year I finally got some pics to show. I bought her 3 years ago for a grand. Had her towed home and put in my garage. I had to finish landscaping my backyard, to make the wife happy, so I have only done a few things so far, and I'm really slow too. Fortunately she's not my daily driver, I just play around with her when time permits. First, I got her running, new fuel pump, battery, plugs, points, 4 row radiator etc. She runs but leaks, I'll be rebuilding the motor soon. Complete brake job, rotors, calibers, drums, pads, shoes, cylinders etc. Also repaired the e-brake, some cables were missing etc. Took dash apart and cleaned, sanded underneath to get surface rust off etc. Installed new gas tank, body mounts, new tail gate and started removing paint, rust from bed and priming. Then I'll do the rockers etc. Just got a welder, so I need to learn to use it. Spending alot of time/money just collecting all the little things. There's more, but hey, I'm getting old and can't remember right now. The plan is just to go through her completely and fix/replace everything, and I mean EVERYTHING, then drive her for awhile. Then I'll make a decision wether to do a complete frame off or just to beat her back into a pile.

Thanks to all on this board for the many ideas, suggestions, parts and most of all inspiration by showing/sharing your rides.

71jimmy 02-05-2005 04:16 PM

5 Attachment(s)
More!

meathead95 02-05-2005 04:19 PM

looks like a nice solid rig! nice crib too!

71jimmy 02-05-2005 04:19 PM

5 Attachment(s)
Still more!

71jimmy 02-05-2005 04:21 PM

1 Attachment(s)
OK, OK, just one more I promise! Kind of fun now that I'm finally doing it.

71jimmy 02-05-2005 04:22 PM

Oh yeah, did you notice that cooooooool bikini top. That's thanks to Yukon and TonyP.

Big J 02-05-2005 04:23 PM

Thats Awesome! You picked that up for a grand. :cong: Keep the pics coming. Progress pics makes the rest of us jealous and want to get to it. haha

Jimmy72custom 02-05-2005 05:22 PM

Looking Good!! It is nice to see another Jimmy. Is your rig a factory four speed?
:gmc:

Yukon Jack 02-05-2005 05:34 PM

Looks like a great K5! Dig the bikini - I must get the K20 completed so I can move on to my K5 - I haven't even pulled my bikini top out for a trial fit :rolleyes: Glad you got one :c2:

crispy 02-05-2005 06:51 PM

looks great!!! congratulations!!! don't apologize for all the pictures, personally, i would like to see more. it's like "Big J" said, progress pics of other people's K5's give me inspiration and ideas for working on mine... keep up the good work, it looks great... on a side note, where did you get the bikini top, i was considering trying to make my own but not if i could get one at a decent price.

FRENCHBLUE72 02-05-2005 10:11 PM

Looks like a solid project.....

LUV2XCLR8 02-05-2005 10:30 PM

:c2: BIKINI TOP :bling2:

71jimmy 02-06-2005 03:38 AM

Jimmy72Custom: yes it's a factory 4 spd.
Crispy: last year around May/June there was a thread on the bikini top. Yukon Jack and TonyP took the bull by the horns and had some made up at that time. I've recently seen this request surface again on the board and I think Yukon Jack was looking into if more could be made. Send him an email and see.

thanks to all for you responses!

donkey69 02-06-2005 04:30 AM

71Jimmy-
thanks for the pics-nice looking-let me know before you "beat her into the ground"!! :bowtie:

crispy 02-06-2005 12:54 PM

thanks '71Jimmy' for the info on the bikini. i'll look into that

Yukon Jack 02-07-2005 12:23 PM

It is likely the guy who made the initial batch of bikini tops will still make them as he owns a company that makes boat tops. Member tonyp is the one to send the order forms to and if you PM me, I will send you the .pdf order form. I would recommend PM'ing tonyp before you order one to make sure he can still get them made.

Canadian694x4 02-07-2005 10:49 PM

Sweet Jimmy Ya Got!! :metal:


All times are GMT -4. The time now is 09:28 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com