4 speed shifter boot
 

I'm getting all the stuff I need to swap over to a granny 4 speed SM465 and the one thing I can't find is a shifter boot. It's not like a regular 4 speed out of a pickup I think, the shifter boot is set farther forward at the front of the tranny tunnel, not in the middle like other trucks. Also the shifter isn't straight, it's got a bend in it that goes up and to the left. If someone knows where I can buy one of these shifter boots new I'd appreciate it. Here's some pics of the boot retainer, shifter, and the knob.

Do you need one? I have a new one(order the wrong one) $15 plus shipping. I'll post a pic.

Yessir I'm looking for a new one. The one that was in the truck was almost gone when we got it.

Here's a pic:

http://img.photobucket.com/albums/v2...s/000_0837.jpg

and
http://img.photobucket.com/albums/v2...s/000_0836.jpg

Oh yea the shifter bend is correct, same thing in the c30 in my sig. On the 4wds w/ 4 spd the motor sits back and thus the shifter sits back. I have a 2wd 4spd shifter in my 71 K20 like it better than the single bend shifter in my 70 k25.

Yep that's the same one, it just looks a whole lot better! :lol: The truck I pulled it from was a '72 GMC 1 ton flatbed with single rear wheels. The only problem is that the tip on the end of the shifter is loose and it had a lot of slop in it. I'll send you a PM.

Here's a shot of the shifter in the c30:

http://img.photobucket.com/albums/v2...s/000_0792.jpg

PM'd you back.