I Need Rust Repair Pics/info.
 

My next step is to install my front and rear lower door pillar patch panels. It would be great if someone has some pics and helpful info on this and the rest of the process of replacing the rocker boxes, floor pans, inner rocker, outer rocker and front cab supports. The whole nine yards in that area. I've got all the parts and a good idea of what to do, with what I've learned so far. I just want to make sure I'm doing it correctly. Here is a link showing pics of where I'm at now.
http://67-72chevytrucks.com/vboard/s....php3?t=140683
Thanks for the help.

This might help.
http://pg.photos.yahoo.com/ph/jason_burkhart/my_photos

Here's an assembly of the replacement parts:

http://home.comcast.net/~sb400/FLOOR_ASSEMBLY.JPG

Floor bracing system http://home.comcast.net/~sb400/mount1.JPG

Mount bolt plate:

http://home.comcast.net/~sb400/MOUNT2.JPG

and floor support at door pillar:

http://home.comcast.net/~sb400/FLOOR_SUPPORT_1.JPG

Please excuse the ugly welding. I'm not quitting my day job any time soon. Of course I don't have a photo of the outside door pillar after installationn, which is what you asked for. I'm sure someone has one though.

Thanks for the help guys. Those pics definitely help. Hopefully I'll be able to drive it this summer, at least up and down the driveway, haha.
Thanks again,
Jason

Hey, driving up and down the driveway is great. Don't laugh! LOL

:agree: :phat:

Thanks for the very nicely detailed pic's...

You can go to CK5.com they have a MSG thred in the first gen blazer section it is a sticky so its at the top full of rocker box and door piller replacement pics.