WTB: 3.73 gears
 

hey everyone. i am looking to get a good set of used gears to go into my GM 10 bolt rear end on my 89 suburban. im located in TX but will pay shipping. thank you.
spcjohnsons@yahoo.com

I have a set of front and rear axles from a 79 suburban if thats any help

do you know what gears are in them and if they are a 10 bolt. im pretty new at all this and am not quite sure what fits what. all i know is that it seems that different bolt rearends seem to use different gears. all i am really interested in are the gears inside...unless of course you have 3/4 or 1 ton axles with lower gears in them and they'll fit on my burb without any major modification. let me know what you have.
-steve

I have the complete axles with 3.73 gears and they are one ton,as far as making them fit I would think you can but I honestly am not 100% certain my neighbors suburban is 2wd otherwise I would look at his truck and mine and I could tell you but I really do think it can be done

i am asking someone more knowledgable than me about the fitment. as soon as he shoots me and answer ill get back to you. so what are you looking to get for the set anyway??

ok he said that the rear would be a complete bolt on. so if you want to just sell the rear let me know how much and then we can figure out shipping and so on. thanks.
-steve

I will take 250 each for them I was wanting to sell them as a set and I will have to remove the leaf springs as well I had them cut at the shackles so eveything should be there

ok, let me get back to you in a couple of days so i can talk to the shop that is going to do this for me. i am not promising anything so if another buyer comes along go right ahead. thanks
-steve

its no problem Im not in any kind of hurry to sell them so take whatever time is needed they will be here

I Have A 3.73 Gear Set On A Posi Unit Out 90 Chevy 1500,the Unit Is 8.5 30 Spline Should Go Right In No Problem,150 Plus Shipping My Zip Is 31217 Weight Is About 35 Pound

sounds like what i need but i can buy a brand new set online for 111. 150 is a little steep.

That with the posi unit and gear and pinion

i dont know a whole lot about this stuff. how about i go to the website and then ill post a link and you can tell me if what i am looking at is right. i am probably wrong but oh well. give me a few seconds.

ok here is the link. now am i looking at the wrong stuff or an incomplete package or what??
http://www.accuautoparts.com/axledet...d=ACC:GM10-373

i will sell you the ring and pinion for 65 plus shipping,the posi unit is what the ring gear goes on