Metal Fuel Line WIth Filter
 

Does anyone know if it is possible to get a screw in metal line from your qjet to a external fuel filter? I thought I saw one on a engine pic posted up here. I will see if I can locate the pic.

Thanks

Ok found the pic..

thats a qjet carb ? :confused:
i like the fuel filter and line though :metal:
never seen one like that

I think that the carb is a edelbrock.

Summit has those. EDL-8131 or EDL-8134
http://store.summitracing.com/partde...0&autoview=sku

not only can you do it..but you should. That is the best place to install it.

But the question is can you put on a qjet? :)

a fuel line is a fuel line....don't matter if it is hooked to a q jet a edelbrock or a toro sprinkler....

Q-jets and EPS carbs are basically the same.

Brad, you're going to have to bend and flare the lines yourself to get that setup on a quadrajet.

What's wrong with the stock fuel filter in the quadrajet?

I always run them, along with an inline under the truck between the tank and the framerail. That gives you one before the pump and one before the carb.

Kevin,
Nothings wrong with the stock fuel filter. Just curious. :)