The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Steering col. turn sig repair... (https://67-72chevytrucks.com/vboard/showthread.php?t=147337)

boraxman

03-23-2005 01:22 PM

Steering col. turn sig repair...

My turn sigs are full manual. I noticed a crack on the part the lever hooks to. What do I need to get em working again? Who has it? Thanks.

junkyardjohn

03-23-2005 02:08 PM

Sounds Like You Need A Turn Signal Switch. They Take About 10 Minutes To Install. Any Of The Board VENDORS, Or Even Your Local G.m. Dealer Should Have Em. ;) John

70c10

03-23-2005 02:10 PM

They also have them in the Help section of your local parts store.

71-longbed

03-23-2005 03:43 PM

only 10 minutes junkyardjohn?? seems like it would take alittle longer than that ... maybe im just slow

Bob Moore

03-23-2005 05:42 PM

You may be able to replace just the cancel cam which is what the lever sets in. This is the most common breakage point IMO. Don't have to mess with wiring that way. THIS should be a 10 minute job including pulling the steering wheel.

Good luck - Bob

junkyardjohn

03-23-2005 07:12 PM

Quote:

Originally Posted by 71-longbed

only 10 minutes junkyardjohn?? seems like it would take alittle longer than that ... maybe im just slow

:hm: WELL THE FIRST ONE COULD TAKE UP TO 12 OR 13 MINUTES, BUT BELIEVE ME ANYONE WHO CAN REMOVE A STEERING WHEEL CAN DO THE WHOLE JOB IN 10 MINUTES OR LESS. :hm: :hm: JOHN

All times are GMT -4. The time now is 10:03 PM.