The 1947 - Present Chevrolet & GMC Truck Message Board Network - Pro Comp 4" lift springs for 73-91 Blazers

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)

- - Pro Comp 4" lift springs for 73-91 Blazers (https://67-72chevytrucks.com/vboard/showthread.php?t=153560)

Esteban86K5

04-30-2005 11:01 AM

Pro Comp 4" lift springs for 73-91 Blazers

Came off my 86 Blazer.(shims not included)
$75 OBO

http://www.scbd.org/phpBB2/modules/g...2788.sized.jpg

gregbr

04-30-2005 07:49 PM

Will these fit a 1/2 ton 85 truck? Why did you need shims? Shipping to 29730.

mudgutsandglory

04-30-2005 08:07 PM

shims look to be to help with pinion angle, but i may be wrong
later
Dan

Esteban86K5

04-30-2005 09:25 PM

Yes it would fit an 85 truck. I have 2 guys ahead of you so I'll see if they want them.

I used the shims because I had some crazy angles going on with my t-case clocked and I needed a better pinoin angle. I ran these without shims when I had it all normal.

All times are GMT -4. The time now is 05:14 AM.