FS. 92 350 TBI, tranny rearend, frame
 

I have complete 350 TBI, 700 R4,,3.42 open 1/2 ton rearend. 87,000 miles.
Short frame with gas tank, suspension and fuel tank. Will sell all for $2,000 or part out. Also have an after market TBI wiring harness $175 and a set of chrome wheels ( ss454 style) with tires $200. Everything is setting in the frame and will run. I was going to put a 55 body on it but don't have the time now so I'm selling the chassis. Located in eastern Ks.

Stock spindles? Are they in good shape? How much?

Is that a reg.cab shortbed frame?
I might be interested in just the frame and suspension.

stock suspension regular cab short bed. I sandblasted and repainted the frame with PPG DP 90 epoxie primer. It's the same black as original. I want to sell the frame and suspension together. I want $750 for the frame, sus, rearend and fuel tank or $500 with out the rearend.

How much for just the rear, sounds like you want $250? Is it 5 lug wheel pattern?

whose brand is the TBI harness and is it new or used?

Rear is a 5 bolt pattern 2 wheel drive. I want $300 by itself. I buddy of mine bought one from a junk yard a while back for $350 for a low milage one.
The harness is brand new. I bought it at the Wichita swap meet several years ago from Phil Wyatt out of Anna Texas. He had a company called Electronic Fuel Injection. I dont know if they are still in bussiness or not.

would you sell the harness for $175 shipped to medina ohio 44256?

drivers right side fender? shipping to 52732?
How about the rear window if its a slider

I'd sell it for $175 and ship it in a small box so it wouldn't cost you much freight.
I have no body parts here.

ok i'll take it, pm me a total w/ shipping and let me know if you want paypal or otherwise.

I'm interested in the wheels but not sure about the tires. What size are they and tread left? Can you get a shipping price to a business at 06066.
Thanks, Larry

I'll try to get you a few pics tomorrow.

I will be headed to the Dallas/Fort worth area in a week or so if that helps anyone and can bring the parts along.

give me your email address. I have a few pics now.

How much for the 350 and 700?

I'll take $1250 for the Engine, stock wiring harness, computer, and 700R4 tranny. It has 87,000 miles on it. It is complete from pan to air cleaner with A/C compressor too. It starts right up fine. Give me your email and I can send a pic if you want. I pulled it out of a wrecked 92 1/2 ton several years back. It's been sitting in my shop since.

Pat
57ringo@bluestemtelco.com

Driveshaft
 

Looking for a driveshaft for this body style w/ a 350-700r4 shortie should be about 77.5 inches. How musch and shipped to 32034??? :hmm: :bling2:

put me second in line for the wheels, shipped to 99011

how much for the AC compressor? Thanks

motor
 

you still got the block im in desprate need of a motor i blew mine last night i dont need the intake or puter just the block

still got it
 

I don't want to part out the engine. I'll take $800 for the complete engine. I have a friend that lives in Dallas that drives back every so often.

wheels
 

I don't know what it would cost to ship the wheels but I'll take $250 with tires and you pay the shipping.

how much for everything? and how close can you get it to denver colorado? ive got a 58 body id like to put on it

all
 

I'd take $1700 for what I have. I sold the aftermarket wiring harness but still have the one that came out of the 92. I don't have a trailer to meet you anyplace and don't know of anyone right off hand that is heading that way. If you want a picture, give me your email.

Pat