The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   Drop spindles on Ebay (https://67-72chevytrucks.com/vboard/showthread.php?t=159137)

John39671 06-07-2005 01:59 PM

Drop spindles on Ebay
 
Seller seems to have good feedback. I am thinking of buying a set. Just thought I would share the info. Item #7979461585

.030over 06-07-2005 07:55 PM

Thanks John!
 
I just bought them! Good deal for $125 shipped. I had been watching for a set to come along for awhile.

John39671 06-07-2005 09:17 PM

I missed a set yesterday for 170+frt. I am glad these came up today. I hope they are worth it.

75stepside 06-08-2005 08:55 AM

i think i may have to jump on the band wagon!

i have a '75 1/2T 2wd - think i have 1.25" rotors? is that the most popular rotor?

beaterC10 06-08-2005 10:23 AM

Quote:

Originally Posted by 75stepside
i think i may have to jump on the band wagon!

i have a '75 1/2T 2wd - think i have 1.25" rotors? is that the most popular rotor?

The earlier trucks had seemed to normally have them, the later trucks have the 1" rotors. Swapping one way or the other requires changing the rotors, wheel bearings, and calipers.

John39671 06-08-2005 10:28 AM

My 84 has the 1 1/4" rotors. I just told my wife that I should buy 3 more sets and sell them at a later date.
THis seller must have scored at a warehouse auction or a going out of business sale to have as many different sets that he has.

bodydropped 06-08-2005 12:28 PM

i got a set of them spindles and there dang god but they were on my truck for a hr thou

SCOTI 06-08-2005 08:50 PM

Thanks!
 
Thanks for spreading the word on that one. I'm helping a friend put together a little 68 swb for his son & I needed some drop spindles to go along w/the disc brake front end I'm selling him.

I snagged a pair. Good deal for the $$.
Thanks again, Scot.

CHEVYE 06-09-2005 12:27 PM

i need 2 sets of these. how do i tell which rotors i have?

bodydropped 06-09-2005 01:28 PM

if u can stick a finger in the vents then there 1 1/4 if not there 1inch

bigblock73 06-09-2005 01:30 PM

Quote:

Originally Posted by bodydropped
if u can stick a finger in the vents then there 1 1/4 if not there 1inch

Man, I would never order rotors based on if my finger fits in the vents. Everybody has different sized fingers. :) If you have small fingers, then they will fit in both size rotors...then what do you do?

Take out the tape measure. :)

C10N.UT 06-10-2005 01:07 PM

Thanks for the heads up,damn near bought some $200 ones.this will save on some more improvements. :)

bodydropped 06-10-2005 01:44 PM

Quote:

Originally Posted by bigblock73
Man, I would never order rotors based on if my finger fits in the vents. Everybody has different sized fingers. :) If you have small fingers, then they will fit in both size rotors...then what do you do?

Take out the tape measure. :)

i just went by what somone posted awhile back

bigblock73 06-10-2005 01:55 PM

Quote:

Originally Posted by bodydropped
i just went by what somone posted awhile back

Don't matter, I was just razzing ya a little --> :)

John39671 06-10-2005 03:42 PM

I think my wife said she was lookin for the guy with the bigger fingers.

86 GMG 06-10-2005 04:04 PM

Quote:

wife was looking for guy with bigger fingers
that ain't right man but it was funny

SCOTI 06-10-2005 11:16 PM

What?
 
Quote:

Originally Posted by John39671
I think my wife said she was lookin for the guy with the bigger fingers.

I heard someone was looking for me? ;)

SCOTI 06-21-2005 08:19 PM

I got them in today. Prompt shipping & well packaged. This should extend my 'karma' credit limit :lol: .

bagged91 06-23-2005 10:13 PM

Does this guy still have them or did he only have a set or two of each? I wouldn't mind a set or two myself. I need a pair for my dad's 87' C10 SWB and I could use a set for my 72 C10 Burban.


All times are GMT -4. The time now is 05:20 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com