The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   parting out 67 2wd longbed 3/4t BIG window (https://67-72chevytrucks.com/vboard/showthread.php?t=170818)

67sss 08-29-2005 09:14 PM

parting out 67 2wd longbed 3/4t BIG window
 
5 Attachment(s)
u-bolts and pads- $15 pair(set)....SOLD

speaker bracket/wire(speaker shot)-$10....SOLD

seat- tilts forward, has hardware on rails, if you live on the west coast, parts of Idaho or Neveda I can ship this thru my employer from dock to dock, for a good price. $75

spark plug heat shields OR overflow tank holders-$5 ea.

let me know if you see what you need on the pic with the rods,switches, ect....this was extra stuff just hangin around.

more to come off the truck,need something????

clay68c10 08-29-2005 11:14 PM

Have any of the front end trim? I could use a right/pass side eyebrow trim piece. Also interested in the coolant recovery bracket.

samwise68 08-29-2005 11:41 PM

body panels?

olblue60@aol.com 08-30-2005 07:32 AM

67 longbed parts
 
Are the blue door panels avail? whats the condition? Any blue seatbelts?Thanks!
John

Jakes-66-K10 08-30-2005 09:32 AM

I'm interested in the throttle road that connects to the carb. Price to 84003?

67sss 08-30-2005 04:50 PM

67 parts
 
clay68-trim all gone, which recovry bracket you want?

samwise68-which ones in paticular?

olblue60-drivers panel torn, pass ok-willget pic and post here for you, belts are blue-think they aren't 67's(center belt too) will add pic

vortexofpain-which rod?

clay68c10 08-30-2005 04:57 PM

The one at the bottom of the picture. What type of payment works for you...

67sss 08-30-2005 05:31 PM

belts/panel pics
 
3 Attachment(s)
here you go olblue

67sss 08-30-2005 05:32 PM

more
 
3 Attachment(s)
and more

samwise68 08-30-2005 09:57 PM

umm..the fenders/grill. pics, if its not too much of a trouble.

67sss 08-30-2005 10:40 PM

fenders/grille
 
5 Attachment(s)
fenders shot, core support shot, grille..... : ) here you go. $80 ptr

clay68c10 08-30-2005 10:55 PM

Payment sent. Thanks

olblue60@aol.com 08-31-2005 06:12 AM

The blue in the picture of the doorpanel looks a little lighter then the one on my 68. Lemme check and i'll get back. Thanks for the pics.

John

olblue60@aol.com 09-01-2005 06:56 AM

My door panels look to be a bit darker. I'm gonna pass. Thanks!

John

jostrans68 09-01-2005 08:40 AM

how much for the seat belts and bolts. I AM in tacoma so no shipping although it may be cheaper than gas

67sss 09-01-2005 06:51 PM

$25 for all 3 sets, I can send to our terminal in auburn if you wanna get em from there.

jostrans68 09-02-2005 08:51 AM

how do you want payment?

CE20934 09-03-2005 10:26 AM

Are those two smaller switches in the picture wiper switches?

67sss 09-03-2005 12:24 PM

parts
 
jostrans68- sent m/o order, will pm addy

ce20934-yes both are wiper switches- $7.50 each shipped to you.

1sick7 09-03-2005 12:41 PM

do you have a driveshaft for sale

Jakes-66-K10 09-03-2005 02:37 PM

Quote:

Originally Posted by 67sss
vortexofpain-which rod?

In your picture above there is a metal rod, threaded on one end and an L bend on the other. It's used to go from the carb linkage to the metal pushrod linkage attached to the firewall, and further down the gas pedal.

Also interested in the windshield washer bracket, shipped to 84003.

67sss 09-03-2005 03:58 PM

stuff
 
1sick7- there's a driveline on this truck 2 pc. what length do you need? measure from center of cup to cup. where do live?

vortexofpain- $15 to you, rod and w/w bracket(in pic 4, right?)

Big Block 09-03-2005 04:30 PM

I would be interested in the u bolts and the overload spring pads. Need total shipped to 27517 and I will send money order and adress. Thanks B.B.

67sss 09-04-2005 02:03 PM

ubolts
 
Big Block-total to you $31.25.thanks

Big Block 09-04-2005 05:07 PM

pm sent Thanks B.B.


All times are GMT -4. The time now is 07:23 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com