Is there any repair panels for this?
 

http://www.moldestuket.com/scott21.jpg
Is there any repair panels for rust around the windshield?
I dont see it as a big problem to weld, but if there are repair panels avaliable thats probably the best way to go..

For repair panel i mean the big brown hole down to the left..the other rust around is easy to take, and i dont think there are any r.panels for that ;)

easiest way would be to turn your truck into a convertable... j/k

Okay..... ;)
Besides this rust its 100% rust free :metal:
The inside
http://www.moldestuket.com/scott25.jpg

None that I am aware of. It looks like your best bet would be to find a metal man that can form the panels for you. Beyond that I would suggest finding another donor cab....

Thanks !
Im gonna get started on the welding then, a donor cab is not that easy to find here in Norway, and since its in grate condition besides this i guess its time to start up the weld :metal:

or maybe find an old rusted out cab that has the good part you want and cut it out and weld it into yours
Doc

find them off of a non rusted cab, and patch em in.

Is that a Mustang front end in the first pic?

modmach1, I may be able to help you. Check your PM's.

Damn :cool:
Yes its a Mustang, a 1968 that will get a new modern look
Here is how it was in the 80`s
http://www.moldestuket.com/ronny68ht.jpg

If you have no luck get hold of me as I have several cabs that are rust free where yours is rotted. I see not much of a problem to cut out a section or two and send it/them to Norway.