axle?
 

how do u install lugnut studs on the axles?

Pull the axle shaft and take it to a machine shop, they need to be pressed in. Unless you have your own shop press.

You do have to remove the axles but You can install them yourself. There are splines on the stud that you line up with the splines in the holes in the axle. Just use a big hammer and drive em in! I have done them on a couple of different vehicles and there was never a problem.

ya i got a big hammer and it work. lol

:metal:

ya, pull them out and beat the old ones out, pound the new ones in. No big deal

where did u get the studs 283?

lol i got 3 at napa and 6 and some small auto store and one at auto zone the one at auto zone was $1.99 napa was cheaper think about $1.40.

Is it possible to have a machine shop drill out the holes for larger studs? My '67 has little tiny 5/16" lugs and I'm afraid when I put my new billet rollers on there that there's not going to be enough lug to secure the lugnuts on there safely. Plus 5/16" is pretty wimpy for 20" wheels.

yes.