Flywheel insp cover Q...
 

The cover for a 4.3/700R4 would fit on an old school TH350 or TH400, right?
How about under a 2004R?
How about under a 2.8 powered rear wheel drive?
What about the powerglide?

Re: Flywheel insp cover Q...
 

bump

Re: Flywheel insp cover Q...
 

Good question! I swear my Powerglide, TH350 or TH400 are all different and will not interchange. Did every tranny have a different cover?

Re: Flywheel insp cover Q...
 

Andy the e dimensions in this website are different for the 350/400ths and the 200/700r4s so I don't know for sure. I have a 350th and a 700r4 but I couldn't find the cover for the 700 and I don't have one for the 350 so I'll look tomorrow and see if I can find the 700 cover and see if it will fit the th350 and get back to you. Meanwhile check this site..

http://www.tciauto.com/tech_info/trans_dims.htm

Re: Flywheel insp cover Q...
 

4L60E/700R4 will fit a 350 (done it with the crappy sheet metal ones)
4L80E will fit a th400

Th400 and Th350 are different patterns, methinks.

Re: Flywheel insp cover Q...
 

anyone confirm/deny grendals statement?

Re: Flywheel insp cover Q...
 

I wish I had a 4L60 around to take pics of for you.

I can take pics of a th350 and th400 though.

Also, stllookn and I agree at least on the different patterns of the th400, th350 and powerglide.

Re: Flywheel insp cover Q...
 

I put a 4l80e dust cover on my TH400. It will only accept the top 2 bolts and extends down to the bottom of the trans pan(th400). I did this because the 502 had the 1 piece rear seal and the th400 cover would not go on it.

Re: Flywheel insp cover Q...
 

Does anyone know where to get a replacement flywheel dust cover for a 3 speed column shift tranny? By the way what is the correct name for this transmission?

Re: Flywheel insp cover Q...
 

Sheet metal (2wd) or cast aluminum (4wd) one?

Sheet metal fit 4L80E cover fit on the Th400 I have in my C10.

Re: Flywheel insp cover Q...
 

it is a sheet metal dust cover that fits a 343 saginaw.
does anyone know where to find one?