The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Parts needed / edited...wrong forum, subscribers only (https://67-72chevytrucks.com/vboard/showthread.php?t=180209)

SigSauerGuy 11-15-2005 10:53 PM

Parts needed / edited...wrong forum, subscribers only
 
Parts wanted need are to be in the classifieds section which is a subscriber area to start new threads.

You might want to review these posts..looks like your looking for the wrong parts...and that type question...as in what you needed to make it work..... does fit in this section...post closed. Start another thread. One asking for what will make this shift down work. da-burb below already answered it though.

You can respond to a subscribers post if they are selling something in the classifieds section without being a subscriber yourself. You must subscribe to start a new post wanting or selling post in the correct classifieds section.

chevy_fatman 11-15-2005 10:58 PM

Re: Parts needed
 
Wrong board, this is the message board, try posting in the for sale board.
It says right in the forum rules, everybody reads them........

Welcome to the forum. :)

phantom dually 11-15-2005 11:17 PM

Re: Parts needed
 
Hoenstly I would take a stroll through the Local Junk yard!! Oh yeah have fun too.

krue 11-16-2005 12:57 AM

Re: Parts needed
 
:agree: You can't post wanted to buy threads, but if you're just looking for info, go to the local parts store. In the section with the chrome dress up and stuff by Holley and Edelbrock they should have a pack of assorted balls and they should have the clip there or in the HELP section.

da-burb 11-16-2005 08:22 AM

Re: Parts needed
 
Kick down linkage on a TH400? TH400's have an electric swtich that mounts to the back side of the carb or in the case of a 71/72's it is mounted to the gas pedal. Th350's however do use a kick down cable that attaches to the carb.


All times are GMT -4. The time now is 01:02 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com