The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Buyer Beware (https://67-72chevytrucks.com/vboard/showthread.php?t=181201)

ljerryd 11-26-2005 09:10 PM

Buyer Beware
 
I am starting my search for a decent relatively inexpensive PU to serve as my part-time hauler and some time project. I have not seen much other than some total restorations that are beautiful, but currently way out of my range.
Is there a sticky or a series of posts somewhere here already that list some of the things to watch out for. Obviously, cab corner and rocker panel rust are pretty common. Are there other areas that are prone to rust? Are there some areas that render a truck nothing but scrap? Since I'm in Texas, I'm hoping a local find might not have major rust, but we are taking 35 year old sheet metal.
If someone can point me elsewhere for this, that would be fine.

Thanks,

Jerry in DFW :confused:

N2TRUX 11-27-2005 12:26 AM

Re: Buyer Beware
 
Jerry I'm no 67-72 expert but since your in Texas you should look for a rust free truck. They aren't as abundant as they once were but they can still be found. Just keep in mind it may be a Texas truck now, but that doesn't mean it was always in Texas.

Beyond cab corners and rockers, another place to watch out for is above the windshield. If it has rust up there it's going to be expensive to repair. Look at the frame too. Although they normally don't rust severly unless before the cab does, you better check it regardless....:)

pebbleboy 11-27-2005 12:43 AM

Re: Buyer Beware
 
I printed this one out a few years ago

http://sporttruck.com/techarticles/1429/

Read it about 20 times :dum:

Alot more stuff to keep you reading for awhile on there too. From basic suspension stuff to swap meet guides. Some pretty good reading (if :new:)

http://sporttruck.com/techarticles/index.html

LUV2XCLR8 11-27-2005 09:01 AM

Re: Buyer Beware
 
:welcoem: to the board from west 10-uh-c :hiya:

papawswrench 11-27-2005 09:24 AM

Re: Buyer Beware
 
Welcome to the board from another Texan !
First look in the Trucks for sale forum , another member might be your best bet for buying a truck .

papawswrench 11-27-2005 09:30 AM

Re: Buyer Beware
 
This one is a nice one .http://67-72chevytrucks.com/vboard/s...d.php?t=181006

ratrod67 11-27-2005 11:10 AM

Re: Buyer Beware
 
Welcome! There are lots of 67-72's here in the DFW area. You wont have to look too hard to find a bunch for sale. in my opinion the main things to look for are cab rust or frame damage. Bolt on parts like fenders and even beds are pretty cheap here especially during swapmeet season. What part of DFW are you in?

junkyarddog1956 11-27-2005 11:53 AM

Re: Buyer Beware
 
Welcome to the board from Indiana .... jyd


All times are GMT -4. The time now is 09:42 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com