The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Th350 driveshaft for longbed? (https://67-72chevytrucks.com/vboard/showthread.php?t=181375)

xtinc

11-28-2005 02:05 AM

Th350 driveshaft for longbed?

I'm swapping my 4 speed manual SM420 for a TH350 with short tail. I'm hoping to find a yoke and driveshaft in my local salvage yard. How common was the 350/350 (short tail) combo in our trucks? What years would fit my 67 C10 LWB?

Thanks in advance
Tom

dallas71

11-28-2005 03:22 PM

Re: Th350 driveshaft for longbed?

I have a 2 piece driveshaft that is available if you cannot find one....the yoke is correct for the 350...if i am not mistaken any 350 should work in you 67 (2wd of course)

Longhorn Man

11-28-2005 07:56 PM

Re: Th350 driveshaft for longbed?

ALL 2 wheel drive 69 - 72 GM trucks with a TH350 had the short shaft.

xtinc

11-28-2005 11:21 PM

Re: Th350 driveshaft for longbed?

Thanks for the info guys. Dallas71 if I can't find one local I'll be getting in touch with you. Thanks again

All times are GMT -4. The time now is 04:38 PM.