locking hub install
 

I will be installing manual hubs on my hd44 today, and wanted to know if there was anything specific I should be doing....is there a specific grease I should be using, wheel bearing?

Re: locking hub install
 

ttt, will I need any special tools to do this?

Re: locking hub install
 

Wheel Nut socket. You can buy them at your local parts store. And IMO, don't use heavy grease on internal hubs, it makes the spring loaded moving parts stick a little. A good grafite dry grease is the best, hard to find. Have fun, its not that difficult.