Updated & Reduced on Misc Performance and etc
 

Some/Most prices reduced

I still have some excellant peices here, the MSD Dizzy was over $200 & never used, The stealthRam setup I have almost $3K invested in some minor port cleanup/welding/powder coating/Air Cleaner & Brackets (Those that are running the newer Vortec style heads can purchase the lower manifold only from Holley vis Summit/Jegs), Lots of guys doing low riders who need shorty headers I have a good set of Sanderson's Block Huggers that cost $400 new just needs collectors, Now shipping wheels and Tires

1. Holley StealthRam Fuel Injection setup
Has 30lb injectors and the Comander950 computer
System is complete except fuel filter. $1300 Free Ship in US, $50 CA.
2. Have 1 used GM Later style 4 wire small cap Distrubutor $35
3. Have 1 new MSD GM Later style 4 wire small cap Distributor $80
Both of these Distributors can be used for the above Fuel Injection system.
4. Muncie M20 – no shifter, in good/descent shape $450
5. Roller Cams, No lifters for retro cams
Retro style CompCams XR276HR $150
Retro Style Crower HR 269/279 Duration 452/477 lift 112 lobe separation $150
CompCams HR286 this is for the 350 roller cam blocks $150
GM Z28/Corvette Roller Cam for Roller Block $150 (Brand New)
7. 67 Chevy Fiberglass Hood $250 No shipping
8. Stepside Tailgate in fair to descent shape (no Rust) $50
9. 2 X Chevy truck 4 speed Bell Housings $40ea
10. SBC Edelbrock Victor JR (2900) $125 like new (Used 1 seasoon)
11. SBC Edelbrock Performer RPM for Quadrajet Intake $110 (like new)

13. Have 6lug GM style Blazer Rims 15x8 with 275/60 tires, with Continental Tires and are like new $300 + Shipping

15. I will also be selling my 2 rear American Racing Tourque Thrust Classices (205 series) 15 x 10 with Firstone Indi 500 295/50/15 tires, Have a 3" BS --Pending
16. Set of good used Sanderson Block Huggers (no Colectors) $45
17. Glove Box door in excellant shape $10
18. Good to excellant shape 3 core radiator $45
19. PS Box out of my 67, no leaks very tight $75
20. Battery Box for a 67 that will clean up real nice $15

Re: Misc Performance and etc
 

I'd like first dibs on the gm aluminum valve covers($75). Any oics of them? Also, need shipping to 16335.

Re: Misc Performance and etc
 

3. Have 1 used GM Later style 4 wire Dizzy $40

Any idea if this would work in a 93 C1500 silverado w/350?
How many miles on it?
Small cap or large?

Re: Misc Performance and etc
 

Burnsman: I thought I had some picks of those covers, I will snap some tomorrow and post as well as any other picks people want to see. No idea how many miles I got it used out of the junkyard and it is the small cap..

454, these are the Dizzies used on the GM TBI unit in the trucks from I believe 82 - 95

Re: Misc Performance and etc
 

Sounds great. Are the edelbrock the old style or new style? I'd be interested in those too pending a pic. Brian

Re: Misc Performance and etc
 

Put me inline for the Set of used Edlebrock Finned Valve covers, Still in descent condition,$40. Would like to see a pic

Re: Misc Performance and etc
 

I think the newer style, ya know the ones with the plastic rivets that always come out, but at least you can buy them..

Re: Misc Performance and etc
 

Pic of the wheels please

Re: Misc Performance and etc
 

I'll pass on the edelbrocks. I'll still take the gm's. Nice looking motor by the way.............

Re: Misc Performance and etc
 

Are these the ones or are you interested in the blazer wheels and tires?

Re: Misc Performance and etc
 

That is the Holley Stealthram setup, as for the motor (413 sbc) it just went bye bye and two different sets of aluminum heads. Now running a 427SBC with some better Valve Covers (GM Black Bowties) Motown Single plane Intake painted black with a BG Mighty Demon 750.

I will try and get out to the garage tomorrow and get some current picks of everything including some other parts.

Re: Misc Performance and etc
 

I'd like to see some better pics of the Stealth setup, which heads does the intake fit.

Re: Misc Performance and etc
 

Still want that hood.Trying to get up for it soon.If someone can get to it sooner,oh well.

Re: Misc Performance and etc
 

Good 3 core raditor
Excellant condition 67 PS box never leaked
Good Battery box will cleanup nice
Brand new thick style bench style seat foam -- Sold

Re: Misc Performance and etc
 

BF Goodrich TA's on on the aluminum wheels in picks above, Continentals on the GM 6 Lug Blazer Wheels 15x8 rims includes Trim Rings and center caps,

Re: Misc Performance and etc
 

Excellant condition 67 glove box door
New still in box MSD GM style EFI Distributor, and used EFI Distributor prices listed above,
Set of Sanderson Block huggers (no Collectors),
Good set of Ram Horns --- SOLD
The Muncie M20 worked excellant, price listed above,
The GM Valve Covers, Will cleanup nicely, also listed above -- Pending

Re: Misc Performance and etc
 

Still some more, The Holley Stealthram Setup, Some good street Strip clutch and flywheels, Flywheels where pruchased new and dont have lots of milage on them, I think I even have another setup that is for the late model single rear main seal, each Flywheel/Clutch setup $85, Also Vic JR Intake in Excellant shape, Prices on the EFI's and Vic Jr listed above

Re: Misc Performance and etc
 

A set of Toyota Rims and tires that came off of a 96 Toyota Tacoma Pickup I had a while back that I had purchased extra rims for winter tires. $50 set. I also am going to be parting out the old Frontend conversion that was on my old frame, It has Mustand 2 spindles - Stock height $100, Set of 11" rotors with maybe 3000miles on them has GM 5x5 bolt pattern $60, GM S10 Claipers and Brackets for the Mustang 2 Spindles $75, Thunderbird Rack & Pinion Setup with tierod ends $75, A set of Alden CoilOver shocks with Chrome Springs rated 550lbs $175, These could be used for front or rear. I will also cut the front Clip if anyone is interested in the whole setup $600 No Shipping or whats left of the rest of the frame for $750.

Re: Misc Performance and etc
 

PM Sent on Vic Jr. Intake

Re: Misc Performance and etc
 

im interested in the electric fan for $15. could you tell me how thick it is? + shipping to 97006

Re: Misc Performance and etc
 

Bowtie, sorry to be a pain. I'm going to pass on the valvecovers. I was thinking they were the cast style (rough finish). Those are the same ones I have. Sorry. Brian

Re: Misc Performance and etc
 

The Electric fan at ist deepest point is 3.5inches, Shipping $15

Re: Misc Performance and etc
 

I'll take the elite series valve covers if they are not spoken for

Re: Misc Performance and etc
 

GABE310 has had first dibbs, waiting back for a response from him, Shipping is $15 (anything more or less is either my gain or my loss)

Re: Misc Performance and etc
 

Dang you still cant make it up here, you could come up on a saturday and still be back for supper.