The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   1/2 vs 3/4 leaf springs (https://67-72chevytrucks.com/vboard/showthread.php?t=1910)

Solver 04-18-2002 01:44 PM

1/2 vs 3/4 leaf springs
 
Got a 1/2 ton 2wd frame to use but 2 center leaves are broke on drivers side.top leaf and bottom leaf are fine. Will leafs from a 3/4 ton interchange and if so which leaves do I use as I think it has six.

Scrub 04-18-2002 02:54 PM

I just left the main one in and added the rest in. You might pick through the 3/4 ones and try to match the 1/2 ton pack for length.

Springs is springs.

------------------
Scrub
70 GMC 1,000,000 + miles
72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends.

Fast68Chevy 04-18-2002 03:50 PM

Solver, they should interchange 69-72 at lkeast if not more years, up to 73 though, 2.5" width i believe, thats what is on the 72 C10 and the 72 4x4 K5 i have around, im sure 3/4 ton are same thing

good luck

------------------
Randy- Lincoln, IL
r68c30@hotmail.com
-71 C-10 350/CH465/3.07
-84 Z28 Camaro 5.0L 700R4, 3.73
-84 Firebird SE 2.8L T-5
-82 Firebird 350 4bolt (TBL)/TH350
buy/sell/hoard/trade most any GM vehicle parts of any kind
-parting out: '81 Cutlass Supreme Brougham
*Paint is overrated
© RSS Enterprises 2000




All times are GMT -4. The time now is 05:44 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com