Clearing some used parts out!!!!
 

Well I am trying to make some room around here!! I have 2 semi loads of new sheetmetal parts coming in this weak. I need some room out front for the trucks to back in to.
I have 2 69-72 front fenders, right and left, and a second left soon for $10.00 each. Minor rust or dent repairs needed.
7 stock 69-72 hoods and 1 67-68 hood. $10.00 each. (Surface rust only on a couple)
Several 3/4 ton wheels and tires, some for free, and one set about 50% for $40.00 with wagon wheels.
3.73 6 lug (1969) 12 bolt rear end $50.00 (2 wheel drive coil)
4.11 Dana 60 rear end - $50.00 (2 wheel drive leaf)
4.10 Eaton rear end - $50.00 (2 wheel drive coil)
2 nice cowls - $10.00 ea
Several nice front and rear crossmembers - $25.00 ea.
67-68 front gravel deflector (nice) - $15.00
305 GMC V-6 engine - Free
Lots more as I part out some more trucks!!
I don't want to ship this stuff, (except the crossmembers) it is just too large and by the time that you figure in the shipping, the parts are not worth it. So please don't ask. Local pickup only. First come first serve!!! WES www.ClassicHeartbeat.com

Re: Clearing some used parts out!!!!
 

AH SHUCKS!

Re: Clearing some used parts out!!!!
 

If I was closer I would take the V-6 and the '67 hood! :(

Re: Clearing some used parts out!!!!
 

Wes, can you get me a pic of the gravel pan and the 3/4 ton rims. I'll see if I can get someone to go out there for me.

Thanks,
jay

Re: Clearing some used parts out!!!!
 

Any 4x4 cross members? I need the one that goes between the forward spring hangers on rear springs.

Re: Clearing some used parts out!!!!
 

HeavyK20, Are you talking about the one just above it? If so, sorry but I do not. The one that is in front of it either is the trans/transfer case crossmember or the factory skid plate.
Here you go Jay..... WES www.ClassicHeartbeat.com

Re: Clearing some used parts out!!!!
 

By the way those are 7, 3/4 ton wagon wheels.... 4 are still on the parts truck, but will be soon off. Here is the gravel deflector. WES

Re: Clearing some used parts out!!!!
 

I need the one that mounts directly between the hangers. The 4x is slightly different than the 2x anyway. I will keep looking.

Thanks.

Re: Clearing some used parts out!!!!
 

Hmm, I don't see that nice 2wd Blazer you picked up a couple weeks ago on this list?

Re: Clearing some used parts out!!!!
 

Hmmmmmmmm, I wonder why...lol I do have a factory Blazer Roll bar for sale though. ($100.00) I was going to use it in the 2 wheel drive and decided that I didn't like the way it looked. :barf: WES www.ClassicHeartbeat.com

Re: Clearing some used parts out!!!!
 

Sending you a PM on the roll bar. Jeff.

Re: Clearing some used parts out!!!!
 

Wes,
I'm interested in the 67-68 hood. Could I get a description and possibley pictures

Re: Clearing some used parts out!!!!
 

I'm gonna pass on the rims. Still trying to get someone up there.

jay

Re: Clearing some used parts out!!!!
 

PM back... Here are some pictures. It is the white one on the bottom. It is a 68 GMC hood and it does not have any sag or dents. On the bottom lip where the outer skin is welded to the inner support, the edge is a little rusty, but that's all I see. Still a nice hood.

Re: Clearing some used parts out!!!!
 

Roll bar still availible.

Re: Clearing some used parts out!!!!
 

Do you have any short bed frames or parts trucks you'd be willing to give up??

Re: Clearing some used parts out!!!!
 

The only short bed 2 wheel drive I had is sold. I have a short bed 4x4 I would concider selling for the right money. WES