The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What are you getting done this weekend???? (https://67-72chevytrucks.com/vboard/showthread.php?t=194709)

FRENCHBLUE72 04-01-2006 12:06 PM

What are you getting done this weekend????
 
1 fuel system installed (done)

2 replace bedside (DONE)

3 finish crossmember

4 mount alternator (WRONG BRACKET HAVE TO SEND BACK TO SUMMIT)

5 start inner bed pannels.. some guys will cry on this one...

6 wash trucks (done)

70c10 04-01-2006 12:14 PM

Re: What are you getting done this weekend????
 
Today I will be working on a dash cluster installing the Camaro tach and clock. Tomorrow going to look at bathroom flooring for my house.

northcountry67 04-01-2006 12:50 PM

Re: What are you getting done this weekend????
 
I don't normally post on these weekend threads because I get my things on the truck done during the week in auto body school. Thursday I painted my glove box door, ash tray and grill a metalic charcoal. I was also tasked to paint a replacement fender for a fellow student for his 93 Caprice. Friday I helped the other student put his fender on and pinstripe his car. Next week I will be blasting and painting my window regulators and door latches.

jimmydean 04-01-2006 12:58 PM

Re: What are you getting done this weekend????
 
Replace turn signal cam, install steering wheel, maybe get the glove box door covered, mock up the door and kick panels, double check the gauge cluster.

How hard is the bedside to replace? I have a passenger side for my long bed, but I'm waiting until I get my gas tank so I can pull the bed and do it all at once.

FRENCHBLUE72 04-01-2006 01:05 PM

Re: What are you getting done this weekend????
 
2 spot welds and a ton of bolts to replace the sides...

Tx Firefighter 04-01-2006 01:19 PM

Re: What are you getting done this weekend????
 
I'll be doing the disc brake swap on my Suburban. I already have the parts layed out clean and orderly, just waiting for me to get home from work tomorrow morning.

When finished with that, I'll begin detailing the engine to get it ready to drop in.

Rokcrln 04-01-2006 03:50 PM

Re: What are you getting done this weekend????
 
5 Attachment(s)
I am getting the Tip & Flip dolly finished for the 55-59 guys! The 67-72 is already out for use.

Kevin
LFD Inc.

Bishops Trucks 04-01-2006 04:42 PM

Re: What are you getting done this weekend????
 
Swapping rear bumpers and putting a hidden hitch on my 4X4.

Bob D 04-01-2006 04:57 PM

Re: What are you getting done this weekend????
 
I sprayed about 7 cans of oven cleaner on my engine, tranny and cab underside to cut some of the grease and oil. Works great on oily stuff, not so well on undercoating. Cans were on sale for $1 each! Also blasted my firewall and gave it a coat of grey ZeroRust for now. Also managed to sand some paint of off the hood before it started to rain, so that is it for today since I have to work outside ( no garage)

Bob

Canadian694x4 04-01-2006 08:33 PM

Re: What are you getting done this weekend????
 
Absolutely nothing seeing as I have to work all weekend :(

Tx Firefighter 04-01-2006 09:06 PM

Re: What are you getting done this weekend????
 
Change of plans for me here. I took on overtime for Sunday too. That will make 48 straight hours of work. Bummer because I don't get to work on my junk, but the extra money will sure buy neat parts.

67ChevyRedneck 04-01-2006 09:08 PM

Re: What are you getting done this weekend????
 
Went to a yard and got some new seat brackets for my '93 bench seat and I got them to cut out the bedside filler door from an 88-98 silverado bedside. It's new home will be my '67's stepsidefender as a filler door for my blazer tank. I also removed about 1/2 of bondo from my "new" used stepside fenders. Good news is that 90% of it was unnecessary, the previous owner of them went crazy with it:crazy:

Palf70Step 04-01-2006 09:22 PM

Re: What are you getting done this weekend????
 
Well so far I had to change out a window regulator in the wife's 02 Bonneville. Sticker shock, $340...dealer item...Oh well Wife is happy, her car is useable again. I also ripped out a fence that was damaged by Katrine, cut dwn some trees, and got about 1/3 of the Azelas trimmed. Tomorrow might be riding the lawnmower and leave the rest of the trees and Azelas for next weekend.

Steelawork'n 04-01-2006 09:46 PM

Re: What are you getting done this weekend????
 
Well, I popped the hood just to see if the parts I bought were going to fit. Looks good now I get to paint them for installation sometime next week. Oops....I left the hood up...someone might actually think I'm working.

boogie67 04-01-2006 09:53 PM

Re: What are you getting done this weekend????
 
Bought a 71 longbed to use for parts for my 67.Has a nice grill,hood,chrome bumper and fenders going to bring it home sunday.

stllookn 04-01-2006 10:27 PM

Re: What are you getting done this weekend????
 
Taxes, Anniversary, bought ivory paint for the Longhorns and rat rod roof/wheels, drove the Longhorn for lots of miles...:metal: :hm: , trying to buy a '72 1-t., trying to complete the set of 9.75 x 16.5 Ansen slots for the Longhorn.

Robert1970C20rstbukt 04-01-2006 11:35 PM

Re: What are you getting done this weekend????
 
1 Attachment(s)
I'm finishing up a trailer to put a welding bed on and set my welder on so I'll have a mobile rig for field work. Just got the trailer hitch welded up on the frame today. The welder ran out of gas so tomorrow I'll fill it back up and finish up some welds, install the jack and safety chains, and it'll be ready to pull except for the lights and it needs a license plate, that's gonna be fun. Once I get a dually I'm gonna put the bed on there and carry the oxy/acetylene cylinders, tools, etc on the truck and the welder will be on a small trailer(it's a big welder, weights about 2000?lbs). Here's the bed, got it for $100! It's in good shape, just has a small section of a toolbox rusted out, other than that it just needs to be cleaned out, all the lights re-wired, and put a new coat of paint on it. :metal:

longhorn71 04-01-2006 11:43 PM

Re: What are you getting done this weekend????
 
working all weekend:(

longhorn70gmc 04-01-2006 11:51 PM

Re: What are you getting done this weekend????
 
Doing alot of part research in books, on the web and at the Auto part stores for my trucks.
Respectfully

Steelawork'n 04-02-2006 12:33 AM

Re: What are you getting done this weekend????
 
Found a company that does rear discs brake conversions for 3/4 tons. That I think is worth an honorable mention at least. http://www.tsmmfg.com/

dougs69c10 04-02-2006 12:45 AM

Re: What are you getting done this weekend????
 
driving my truck on public roads for the first time

FRENCHBLUE72 04-02-2006 12:51 AM

Re: What are you getting done this weekend????
 
Got some video today how do you guys post yours???

FRENCHBLUE72 04-02-2006 01:11 AM

Re: What are you getting done this weekend????
 
http://videos.streetfire.net/video/3...668B80DAE3.htm

jrb71c20 04-02-2006 01:17 AM

Re: What are you getting done this weekend????
 
Workin tonight and yardwork tomorrow if it don't rain too bad. If we get rain, out in the garage trackin down wiring issues with the heater lights and back up lights.....cmonnnnnnnnnnnnnnn rain

bad68bowtie 04-02-2006 01:27 AM

Re: What are you getting done this weekend????
 
Hit up a car show at Stone Mountain today, saw some really cool stuff, in particular a '68 Suburban and a '70 stepside. The burb was a pretty cool custom, had a T56 in it as well.

Headed down to Florida tomorrow for spring break, definitely ready for the week off and relaxation, hopefully I won't be a candidate for skin cancer when I come back.


All times are GMT -4. The time now is 12:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com