The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Need help again! (https://67-72chevytrucks.com/vboard/showthread.php?t=198401)

Nima	05-05-2006 05:47 PM

Need help again!

OK!, It is time to put things back together. All front disc parts are ready (new or cleaned and painted) . Now my question is: I am putting the A-arms and shaft assembly back togther. I believe the end nuts on shaft assembly just bolts on the shaft, I just have to force them through the A-arms holes. Is this right? Thanks.
P.S : you are gona hear a lot until I finish with this swap:confused:

jsbgump

05-05-2006 06:48 PM

Re: Need help again!

put the shaft in the a- arm and the crew the caps on

Nima	05-05-2006 07:05 PM

Re: Need help again!

That's what it looks like to be. I just wanted to be sure. Thanks

jsbgump

05-05-2006 07:31 PM

Re: Need help again!

No prob. Just make sure that the shfts cap screws on straight and not coked at a angle.

All times are GMT -4. The time now is 11:01 AM.