Need`72 HO52 U-bolt plate
 

Like it says.I`m putting springs on the rear of my Highlander and discivered one u-bolt plate has one ear cracked off.I can weld,but figured I`d give finding another a shot first.Remember,this is`72-only with the inverted u-bolts with the plate and nuts under the axle and the square u-bolts.

Re: Need`72 HO52 U-bolt plate
 

I am getting the 72 jimmy from bills bowtie and if it has the right piece on there its yours...Thanks,Erick

Re: Need`72 HO52 U-bolt plate
 

Is the Jimmy stock? unless the rear has been upgraded, its probably got a 12bolt, not an eaton rear

Re: Need`72 HO52 U-bolt plate
 

I need the plates from a 3/4t,thanks.

Re: Need`72 HO52 U-bolt plate
 

If the Dana has the same axle diameter,they should work,too.TTT

Re: Need`72 HO52 U-bolt plate
 

i think i might have a plate, if you still need it, any way to post pic of the one you need???
jamie

Re: Need`72 HO52 U-bolt plate
 

Yes Jamie,I need it and I`ll get a pic on here tonight,thanks.

Re: Need`72 HO52 U-bolt plate
 

Hey Jamie,My wife went out of town with the USB cable in the camcorder bag.Can`t load the picture.:confused:

Re: Need`72 HO52 U-bolt plate
 

lol no prolbem, if you get pic send it to me i`m pretty sure i got a couple.
jamie

Re: Need`72 HO52 U-bolt plate
 

TTT.Still need this part,y`all.Jamie,I pmed Rod.

Re: Need`72 HO52 U-bolt plate
 

Jamie,no reply from Rod.I will take yours anyway.If the bolt spacing is 4" then I`n=m sure it`scompatible.Let me know how much,thanks.