The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)
-   -   Front hub problems 72 4x4 help (https://67-72chevytrucks.com/vboard/showthread.php?t=206158)

Jesse72 07-21-2006 04:49 PM

Front hub problems 72 4x4 help
 
I have a 72 4x4 that i have been working on for about two year and i just got it on the road but the front hubs keep coming lose. I dont know why i have torked them down and locktighted the nuts inside and they still keep doing it. I am not sure if i am missing a piece somewhere. Any response will help or a good diagram I have already destroyed a set of wheel bearings and two hubs.
Thanks,Jesse

72 CustomCamper 07-22-2006 12:43 AM

Re: Front hub problems 72 4x4 help
 
Sounds like the inner spindle nut is missing the little pin that locks into the lock washer...

special-K 07-22-2006 10:42 AM

Re: Front hub problems 72 4x4 help
 
That sounds like a good possibility.Could you list what parts you have installed from the outer bearing-out?

nu2-72 07-23-2006 08:19 AM

Re: Front hub problems 72 4x4 help
 
send me an e-mail address and I will send pics

Jesse72 07-26-2006 06:48 PM

Re: Front hub problems 72 4x4 help
 
Yes that was the problem thanks guys but now I have another problem I need a set of hubs for a 72 1/2ton 4x4


All times are GMT -4. The time now is 08:27 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com