76 Gauge Cluster/Bezel?
 

Hello,
My buddy just got a 76 1/2 ton for the motor. Would the gauges and bezel work in my 82?
thanks,
Harvard

Re: 76 Gauge Cluster/Bezel?
 

I believe they will. I don't believe they changed much in the cab

Re: 76 Gauge Cluster/Bezel?
 

I think you might have to use the printed circuits.... does the 76 have an ammeter or a voltmeter?

Re: 76 Gauge Cluster/Bezel?
 

I'd assume it'd be a voltmeter..thats what my 77 has

Re: 76 Gauge Cluster/Bezel?
 

I am unsure when they switched to voltmeters... I can't recall if it was when they switched to HEI (which was 75) or if it was a couple years later.

Somebody 'round here is gonna know for sure.... you can always check out www.73-87.com, I'm sure the answer and a 5 page explanation is on there.

Re: 76 Gauge Cluster/Bezel?
 

No, it will not work correctly. The 76 still had a mechanical oil pressure guage and an ammeter (amps) rather than a voltage guage.

Re: 76 Gauge Cluster/Bezel?
 

when did they switch to elec oil sending units? my (again) 77 has mechanical

Re: 76 Gauge Cluster/Bezel?
 

1978 had electric oil sending... 78-up is the only bolt in for the 81-87(91).

EDIT: here is the info you want: http://www.73-87.com/7387garage/inte...achometers.htm

Re: 76 Gauge Cluster/Bezel?
 

Thanks Guys. Dang it, I had it for free. Still havent said no though. Would the bezel work? If so, I can keep then bezel and get rid of everything else.
Thanks,
Harvard

Re: 76 Gauge Cluster/Bezel?
 

yes, the bezel will work. Just dont be surprised if the top left corner breaks off. Apparently thats a normal occurance.

Re: 76 Gauge Cluster/Bezel?
 

I concur.

Re: 76 Gauge Cluster/Bezel?
 

If it does, just glue it back. The later (81-up) dash pad comes out further, and will help hide it.

Re: 76 Gauge Cluster/Bezel?
 

...or, since it is free, take it all and keep the gauges and other parts that you may need in the future, i.e. like if the fuel gauge goes out.

Re: 76 Gauge Cluster/Bezel?
 

My 76 has the mechanical oil but the voltmeter. I tried fitting an aluminum bezel from an 81 on my 76 and it wouldn't fit right. But if it's your friend and it's free it is worth a try.

Re: 76 Gauge Cluster/Bezel?
 

NOTE:

wiper switches MAY BE different.

Re: 76 Gauge Cluster/Bezel?
 

Thanks guys. Just my luck. I am taking it any way. Just in case, I happen to know of anyone that needs something, or to just have extra parts!
Harvard

Re: 76 Gauge Cluster/Bezel?
 

The wiper switch should be the same. I have two '82s and they both have the switch on the dash...not the column. And the high beam foot button thing.

Re: 76 Gauge Cluster/Bezel?
 

I know on my 76 I have a junk yard 85 Bezel and it DO"NT work. Well' let me rephrase that it will work but it bends at a diffrent form . The reason why I know this is because the Bezel is off A 85 and the lower half is off A 76 THEY DO NOT CONFORM TOGTHER CORRECTLY.