The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   Parts needed..... (https://67-72chevytrucks.com/vboard/showthread.php?t=208197)

FuelCellGuy 08-12-2006 05:55 PM

Parts needed.....
 
I am in need of a complete steering coupler for a power steering setup. I also need sway bar bushing straps and bushings. THe list grow longer. I will post when I remember what else I need. If you have any of the above, drop me a line. Thanks, Mark

roj2323 08-12-2006 06:20 PM

Re: Parts needed.....
 
i can't help ya on the coupler thing but if you get a bushing kit at napa or a simular store they many times come with the metal straps as well.
ondrew

incoma 08-12-2006 06:49 PM

Re: Parts needed.....
 
if the bushing kit is the same as a rag joint, I know you can get those in the "Help" section at autozone and pepboys for just a few $.

FuelCellGuy 08-12-2006 06:51 PM

Re: Parts needed.....
 
I need the entire splined section that attaches to the gear box itself. I have two good rag joints but the splined section is for non-power steering gearboxes. Thanks, roj, my local parts store had the bushings only. Later, Mark

billsbowtie 08-12-2006 10:00 PM

Re: Parts needed.....
 
Can You Get A Pic. Of What You Need And Post It Here.[steering Coupler]

FuelCellGuy 08-12-2006 10:21 PM

Re: Parts needed.....
 
2 Attachment(s)
Here's what I need...

FuelCellGuy 08-12-2006 10:22 PM

Re: Parts needed.....
 
The first picture shows the front and back side of a non-power steering setup. The second, shows where it goes. Thanks, Mark

billsbowtie 08-12-2006 10:53 PM

Re: Parts needed.....
 
i don't have any extra's i just have the ones on my steering boxes. i thought it was part of the steering colum that you needed sorry.

FuelCellGuy 08-13-2006 01:06 AM

Re: Parts needed.....
 
Ttt!!!

jay_shy 08-13-2006 08:45 AM

Re: Parts needed.....
 
Try the bottom middle of the following link...

http://www.truckandcarshop.com/trucks60_72/t60_106.html

Jason

FuelCellGuy 08-13-2006 11:14 AM

Re: Parts needed.....
 
Thanks!!!


All times are GMT -4. The time now is 04:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com