Door bottom replacement
 

Does anyone make a one piece replacement for the lower 6-12 inches of doors, that is one piece? This is the last of my body work to replace. both doors are really good, except the bottom and they have rust and all the way in places. Just seems to me, it would be easier to replace the one piece than the two pieces I see in the catalogs.

Re: Door bottom replacement
 

Are you talking about the outer or inner bottoms of the door.

Re: Door bottom replacement
 

:agree: Do you have a pic of the area to be replaced?

Re: Door bottom replacement
 

it is both the inner and outer parts. that are bad.. I know LMC has two parts, I was just wondering if someone had a one piece...thought I saw one in a catalog somewhere...thanks

Re: Door bottom replacement
 

I think you`re best off with the two seperate pieces.It allows for better adjustment and the doors are made with the inner and outers seperate.

Re: Door bottom replacement
 

Brothers has some panels and the door bottom;
http://brothersonlinestore.com/prodi...number=IDB7200
http://brothersonlinestore.com/prodi...number=ODBC200
http://brothersonlinestore.com/prodi...number=ODB2100
http://brothersonlinestore.com/prodi...number=ODB7200
Dano

Re: Door bottom replacement
 

My son is going to pick the two pieces (for each door) up Monday at OUOtback Truck Parts for me . Save that frieght. Inner and outer botoms for both doors. Any warnings or advice before I start...I have done some replacement stuff floorpans, rockers, havn't done anything like this yet..
!. MEASURE TWICE..
2. TAKE YOUR TIME
anything else???