The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - New Break Line 65 (https://67-72chevytrucks.com/vboard/showthread.php?t=209915)

Hutton64/65

09-02-2006 09:31 PM

New Break Line 65

Need suggestion on repairing the break line to the Master cyl.
I have replaced the master but the break line will not come loose at the bottom T. I thought replacing the line would be not big deal but the thing will not come loose. Help......

mbgmike

09-03-2006 08:40 AM

Re: New Break Line 65

You may have to replace the lines to. Would not hurt. You can try soaking it of course in some penetrate but I would replace the lines. If they are original they probably need it anyway

jgrh64

09-04-2006 10:48 AM

Re: New Break Line 65

after so long the lines rust to the nuts - are you using a line wrench ? they help allot !!

Hutton64/65

09-06-2006 10:09 PM

Re: New Break Line 65

Yahooooooooooooo.....
Got it!

All times are GMT -4. The time now is 05:00 AM.