The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   WTB 72 swb drive shaft (https://67-72chevytrucks.com/vboard/showthread.php?t=214219)

72chop 10-24-2006 09:29 PM
WTB 72 swb drive shaft
 
i need a drive shaft that has a tube size of 54 " weld to weld. i need standard small spline for muncie 4 spd for my short bed

zden 10-25-2006 04:46 PM
Re: WTB 72 swb drive shaft
 
i have a drive shaft out of a 67 swb that was a 6 cyl 3 speed. i can measure it and see if it is the right length when i get home tonight. i think it is pretty close to that.

zden 10-26-2006 01:09 PM
Re: WTB 72 swb drive shaft
 
sorry its 58" from weld to weld

71/454 10-27-2006 12:50 AM
Re: WTB 72 swb drive shaft
 
I have one out of a short box 67 let me measure and I'll get back to you.

larry may 10-30-2006 07:48 PM
Re: WTB 72 swb drive shaft
 
I have one 53 inches from weld to weld and ran it behind a Muncie 4 speed.In a short 1968 c-10........ Fine spline? How many splines? You pay shipping I'll give it to you. My parts are cheap.send a pm if you want it.........Larry

71/454 10-31-2006 12:34 AM
Re: WTB 72 swb drive shaft
 
I measure 52 1/2 inches on mine weld to weld. Let me know if you want it, same thing you pay shipping its yours.


All times are GMT -4. The time now is 12:09 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com