The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Starter Solenoid (https://67-72chevytrucks.com/vboard/showthread.php?t=215145)

ajbell78 11-03-2006 10:25 AM

Starter Solenoid
 
Hello, I've got a 65' Chevy C10 V6 230. I replaced the starter/Solenoid

and far as I can remember, there are 5? wires.
exactly how they were when I took them off, and the new starter/solenoid has the same configuration as the old one

For the wires, I have a Batt, Ignition, coil, and then two wires that I belive goto a trailer light hook up or something.

So I'm just needing to know what post the Batt wire
goes onto, what post the ingintion wire hooks onto
etc. I beilive that the starter solenoid has 4 posts, one middle post, one post on each side and one post on the top.

This is probably a really dumb question, that I should know, but when it comes to the electrical stuff I'm really a newbie, give me a door to be bonded or sanded & I can get the job done, but any electrical stuff I get a little confused

Thanks for any help

AJ

salazar44 11-03-2006 05:33 PM

Re: Starter Solenoid
 
Starter Wiring Diagrams - Check out this page and it will show you exactly how to wire your starter.

salazar44 11-06-2006 02:31 PM

Re: Starter Solenoid
 
so did the diagrams help?


All times are GMT -4. The time now is 08:25 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com