The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Welcome Area (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=50)
-   -   Hi, From the small town of Boring, Oregon (https://67-72chevytrucks.com/vboard/showthread.php?t=215625)

Bad71chev406sbc 11-07-2006 05:35 PM

Hi, From the small town of Boring, Oregon
 
Yes, that is a REAL name of a REAL town here in Oregon. I'm about a half hour away from Portland.

My name's Shane, am 20yrs old, and after 2 years of saving up money from mowing lawns and doing yardwork for neighbors, I bought my truck at age 16. My truck is a '71 Chevy 2wd SNB. Started out life with a 350, granny 4spd, 12bolt w/ 373 posi(not there anymore). I know this is probably said all the time, but my truck was a real farm truck back in the day.

Bought her with a 305sb and the 4spd, blew up the 305, put in a 400sb, and now I'm almost done rebuilding the now 406 small block...hence my screen name. When I bought it, it was slammed with a top of the line suspension system....."way-too-cut" coils up front with 2x4 wood on top of the spring; the rear was also "way-too-cut" coils with about 3 of those screw in spacers on it. Now rides on 2" early classics up front, stock rears....GOSH, I sure wish it was slammed properly. I've probably dumped about 6k into her, and she's still, what I call, a POS Beast. I'm also putting in a TH350 w/ B&M transpak and Starshifter. I got too sick and tired of adjusting the clutch linkage, making new parts, modifying the old part, making the clutch work.......I blame myself because I "had" to have headers. Exhaust is 2.5" Flowmaster Super 40s, exiting through 3.5" slant cut tips in front of the rear axle.

I'll probably be pretty active here, as I'm very active in the Ford Ranger forums, which I also have a 2001 Ranger.

Here's some pics.

1 week after I bought her, and $600 later in parts.
http://memimage.cardomain.net/member...6_103_full.jpg

http://memimage.cardomain.net/member...94_22_full.jpg

http://memimage.cardomain.net/member...94_24_full.jpg

The 406 small block....can you say "sleeper"
http://memimage.cardomain.net/member...6_108_full.jpg

LED tails in homemade brackets.
http://memimage.cardomain.net/member...6_107_full.jpg

I wish it were still this low!
http://memimage.cardomain.net/member...66_66_full.jpg

High School Car Show; '71, '71, '69, '70.
http://memimage.cardomain.net/member...6_110_full.jpg

http://memimage.cardomain.net/member...6_111_full.jpg

71SWBChevy 11-07-2006 05:52 PM

Re: Hi, From the small town of Boring, Oregon
 
:welcome2: to the board from KY!

71chevylowrider 11-07-2006 05:56 PM

Re: Hi, From the small town of Boring, Oregon
 
Welcome! Nice Ride, I sure love the 71

jsbgump 11-07-2006 06:07 PM

Re: Hi, From the small town of Boring, Oregon
 
welcome to the board from Texas

58 gmc 11-07-2006 07:27 PM

Re: Hi, From the small town of Boring, Oregon
 
welcome to the board from okc, nice looking truck there.

johnnywagon 11-07-2006 07:35 PM

Re: Hi, From the small town of Boring, Oregon
 
I've been thru Boring. Welcome, sweet ride...LUV the color.

krue 11-07-2006 08:49 PM

Re: Hi, From the small town of Boring, Oregon
 
Welcome to the board from South Mississippi! That's a good looking stepside you have there.:D

kris johnson 11-07-2006 08:49 PM

Re: Hi, From the small town of Boring, Oregon
 
nice burn out.hay from san antonio

b&a72 11-07-2006 09:58 PM

Re: Hi, From the small town of Boring, Oregon
 
Welcome from AZ!

Canadian694x4 11-07-2006 11:26 PM

Re: Hi, From the small town of Boring, Oregon
 
Welcome To The Boards From The Great White North! Nice Truck, and are those your friends rigs?

shaneschevys 11-08-2006 02:05 AM

Re: Hi, From the small town of Boring, Oregon
 
Welcome from FT Worth TX. Thats a good lookin set of trucks there.

Bad71chev406sbc 11-08-2006 04:45 AM

Re: Hi, From the small town of Boring, Oregon
 
Thanks everyone for the compliments.

johnny....i too love the color of your truck.

The 3 other trucks are all my friends, I'm helped prep and paint both the blue and red ones....also made clutch linkages for both also.....they too have headers. I almost bought the blue one....before my friend bought it, glad i held out for a 2wd shorty.

86swb 11-09-2006 09:33 AM

Re: Hi, From the small town of Boring, Oregon
 
Welcome to the board from Western Kentucky. Love your truck.

Aarons72s 11-10-2006 01:47 AM

Re: Hi, From the small town of Boring, Oregon
 
Welcome to the board from oklahoma.
Aaron

Hoods69BadBowTie 11-10-2006 03:21 AM

Re: Hi, From the small town of Boring, Oregon
 
Yah, welcome to the best board around from MT. Awesome looking ride u got there too.

N2TRUX 11-10-2006 08:51 AM

Re: Hi, From the small town of Boring, Oregon
 
Welcome to the forum Bad71chev406sbc...:)

LUV2XCLR8 11-10-2006 06:58 PM

Re: Hi, From the small town of Boring, Oregon
 
:welcome2: From West TN :hi2:

CAL 58 GMC 11-10-2006 08:49 PM

Re: Hi, From the small town of Boring, Oregon
 
Welcome from central California. I love your truck!! I had a 72 short bed fleetside that same color.

FRENCHBLUE72 11-11-2006 10:38 AM

Re: Hi, From the small town of Boring, Oregon
 
Welcome to the board from southern oregon..

IGOR 11-12-2006 02:53 AM

Re: Hi, From the small town of Boring, Oregon
 
Welcome from Damascus, OR

I think of seen that truck of yours around town

BOSS 11-27-2006 04:36 PM

Re: Hi, From the small town of Boring, Oregon
 
Sweet truck.Welcome to the board from Missouri and thanx for joining up :)


All times are GMT -4. The time now is 04:49 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com