The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   F/S Speed warning dash & NOS wood grain molding (https://67-72chevytrucks.com/vboard/showthread.php?t=218993)

PT'S 70 CST 12-09-2006 08:39 PM

F/S Speed warning dash & NOS wood grain molding
 
3 Attachment(s)
F/S speed warning dash dail moves freely and eveything works but the temp gauge works and I can probably find around here somewhere I also have the buzzer and a new harness for the dash will post a pic. 300.00 shipped. NOS pass. side woodgrain door molding 50.00 shipped.
PT

51 68CHEVY 12-09-2006 08:52 PM

Re: F/S Speed warning dash & NOS wood grain molding
 
thats a lot of money. you'll never get that much for it its not even got a tac. sorry to rich for my blood. good luck selling it.



XII. It is against our policy for someone to post a complaint about a members price on whatever they are selling. If you don't like the price then skip it. Let it drop to the bottom on its own. They (potential buyers) will figure it out, why nobody is jumping on that particular item.
http://67-72chevytrucks.com/vboard/a...t.php?f=34&a=9

PT'S 70 CST 12-09-2006 09:00 PM

Re: F/S Speed warning dash & NOS wood grain molding
 
That is your opinion if you do not want it then do not reply. I bought this dash from GMC PAUL and this is what I paid for it.

PT

jerry moss 12-09-2006 10:34 PM

Re: F/S Speed warning dash & NOS wood grain molding
 
I Thought The Board Rules Prohibited People From Complaining About Another Persons' Selling Price.

PT'S 70 CST 12-09-2006 10:45 PM

Re: F/S Speed warning dash & NOS wood grain molding
 
Thanks so did I. I bought this same dash from GMC PAUL about a year ago and have found another in a junk yard so I am selling this one and this is what I paid for it.

Thanks PT

muddyole 69 12-09-2006 11:02 PM

Re: F/S Speed warning dash & NOS wood grain molding
 
I have a stupid question :crazy: are the door moldings interchangable side to side ? Do not mean to jack your thread just wanted to know my pass side molding is bent up pretty bad and was considering yours thanks Mike

PT'S 70 CST 12-09-2006 11:07 PM

Re: F/S Speed warning dash & NOS wood grain molding
 
I would say no after looking at this one it has a rounded edge at the top and more of a beveled edge at the bottom. The back of the molding on one end is boxed off and the other end is tappered so I would say this is a pass. side. You want the tappered edge to the front of the door were it opens and the boxed off edge at the end were it latches.
By the way hows it going Mike did you ever sell the truck that you bought from me.

PT

muddyole 69 12-09-2006 11:26 PM

Re: F/S Speed warning dash & NOS wood grain molding
 
Goin good Paul had to sell it and really wished I hadn't many times that bed was the straightest I have ever had :whine: but hey thats the nature of the game anyway I have a long bed highlander I need that molding for and I will check on mine in the morning and see if it is the one I need and get with you thanks Mike

PT'S 70 CST 12-11-2006 12:10 AM

Re: F/S Speed warning dash & NOS wood grain molding
 
ttt before it goes to ebay.

PT

phlegm 12-11-2006 11:47 PM

Re: F/S Speed warning dash & NOS wood grain molding
 
51 68chevy only has 64 posts, he will get the hang of it..... Ive been here a couple of years and I still dont think I have read the rules lol. Wish I had the cash that SW would be fun to have, rare too! you can get the tachs to go in.

ttt for ya

phlegm 12-11-2006 11:48 PM

Re: F/S Speed warning dash & NOS wood grain molding
 
hehe wrong year, good I get to keep money I dont have anyway lol.

PT'S 70 CST 12-30-2006 09:59 AM

Re: F/S Speed warning dash & NOS wood grain molding
 
I will go 290.00 shipped and add a nos knob. Dash,buzzer,harness and nos knob.

PT

72armyswbtruck 12-30-2006 08:52 PM

Re: F/S Speed warning dash & NOS wood grain molding
 
Man that is a good deal if I only had the money

PICKMUP 12-30-2006 10:39 PM

Re: F/S Speed warning dash & NOS wood grain molding
 
Add a pic of the back side of the SW dash with the buzzer/harness shown. There is interest. That may make it happen.

PT'S 70 CST 12-31-2006 12:30 AM

Re: F/S Speed warning dash & NOS wood grain molding
 
Will do tomarrow night after work (12 hr. shift), this dash was bought from GMC PAUL'S dash, buzzer, new harness and I will add an NOS knob. I will try and add some pics tomarrow night. I will consider a partial trade for a good vacuum gauge.

PT

PT'S 70 CST 01-02-2007 03:57 AM

Re: F/S Speed warning dash & NOS wood grain molding
 
Here are the pics with the buzzer,new harness and new (NOS) knob.

PT

PT'S 70 CST 01-02-2007 12:17 PM

Re: F/S Speed warning dash & NOS wood grain molding
 
TTT on the dash or its going to ebay tonight.



PT

hvychve 01-15-2007 07:58 PM

Re: F/S Speed warning dash & NOS wood grain molding
 
curious to know if you still have the speed minder, I wouldnt budge on the price , I paid $300 just for the speedometer head and the guts for the cable , no buzzer . I guess I got hosed, but I feel your price is not all that bad. those are pretty rare and if I had a few extra clams I would buy just for that reason. dont go down on price anymore, someone will buy. good luck

PT'S 70 CST 01-15-2007 08:35 PM

Re: F/S Speed warning dash & NOS wood grain molding
 
I sold it on ebay for 315.00 but the bad thing is it wound up selling to a board member. I have had 8 or 10 of these clusters and with it being complete I think he still got a good deal.

Thanks PT

PT'S 70 CST 01-15-2007 08:36 PM

Re: F/S Speed warning dash & NOS wood grain molding
 
TTT the wood grain is still for sale or I will trade it for a good vacuum gauge.

PT


All times are GMT -4. The time now is 11:20 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com