71/71 Complete 1/2 SWB 4x4 frame and suspension
 

No Title or cab VIN plate

Frame is West Virginia rusted from transfer case crossmember back
I pulled the spider gears out to check gear teeth, have not put them back tgether in case some one wants pix
all parts listed below are in good shape, exceptions noted

3:73 open gears, rear axle housing and backing plates are rusted by spring perches, gears , axles and bearings good shape,
3:73 front axle complete with all steering linkages, hubs free, calipers seised
front and rear driveshafts
engine crossmember with engine brackets
transfer case crossmember
transfer case stock 205?
4 speed trans with adapter complete not sure of condition, shifter boot not there, sitting outside
most of the spring perches are good shape, 2 have a little rust
P/S box complete with P/S pump with some of the brackets, pump turns free

The above is still mounted to frame with wheels, sheet metal was removed, engine and bell housing the rest is bolted to rusted out frame. Was driving until it wouldn't pass inspection because of frame rust.

$500 OBO, will part out.
Give me your e-mail and I will send plenty of pix

Thanks Steve

Re: 71/71 Complete 1/2 SWB 4x4 frame and suspension
 

If it doesnt sell and you part it out I might be interested in the engine crossmember/brackets if its for a 350
Thanks,
Dustin

Re: 71/71 Complete 1/2 SWB 4x4 frame and suspension
 

It's straight across so it's for a V-8

Re: 71/71 Complete 1/2 SWB 4x4 frame and suspension
 

Ttt

Re: 71/71 Complete 1/2 SWB 4x4 frame and suspension
 

Put me in line for the whole frame,,, Where is the frame bad?? I need to see pics of that, do you have title and vin to go with it ??You can send pics to KING6772@msn .com thanks

Re: 71/71 Complete 1/2 SWB 4x4 frame and suspension
 

I will send tomorrow, no title and the frame is West Virginia rusted and repaired, great components but all the frame is good for is that everything is bolted to it. I will check on Vin I stripped the sheet metal off of it but I think I kept the plates

Pix sent 6772 king

Re: 71/71 Complete 1/2 SWB 4x4 frame and suspension
 

Ttt

Re: 71/71 Complete 1/2 SWB 4x4 frame and suspension
 

Would you consider selling/shipping the 205 transfer case/shifter componets?

Re: 71/71 Complete 1/2 SWB 4x4 frame and suspension
 

I have another transfer case with shifter . Have to dig it out from under my work bench. Sounds easy but there is a pile in front of it. Will do it Sunday.
It's out of a 71 K-5. Pm me your email and i will send pix

Re: 71/71 Complete 1/2 SWB 4x4 frame and suspension
 

Ttt

Re: 71/71 Complete 1/2 SWB 4x4 frame and suspension
 

how bad is it rusted? do you have any close ups of the rust damage? do you think it is easily repaired? thanks in advance Mike my e-mail is mtbbailey@yahoo.com

Re: 71/71 Complete 1/2 SWB 4x4 frame and suspension
 

FRAME IS WASTED FRON THE TRANSFER CASE BACK...........west virginia.........
Believe me I have been looking for a SWB frame for a while.
It would be great for a 2 wheel to 4 wheel conversion or if you want to upgrade a closed knucle to an open knuckle.
If it doesn't sell in the next week I will part it out.

Re: 71/71 Complete 1/2 SWB 4x4 frame and suspension
 

Ttt

Re: 71/71 Complete 1/2 SWB 4x4 frame and suspension
 

I will TTT this for you:)
Did you ever get those pics emailed?I havent got them if you have.
Oh,if you part out the frame I need a bracket off the back of it.I will try to get a pic of what I need.