The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   15X8 6 lug M/T Classic II in NC (https://67-72chevytrucks.com/vboard/showthread.php?t=224245)

qksilver 01-21-2007 11:07 PM

15X8 6 lug M/T Classic II in NC
 
1 Attachment(s)
For sale 15X8 6 lug Classic II wheel, very good shape with caps, one has a cut in it where the P/O tried to make it fit front 4X4 hubs.

The back spacing is 3 3/8 from the hub to the outside lip.

$250 plus shipping

I am located 30 miles west of Fort Bragg NC 28387

Thanks,
Steve

msgross 01-24-2007 03:31 PM

Re: 15X8 6 lug M/T Classic II in NC
 
do you have the front caps for these or are they for 4WD lockouts? I am looking for a set of caps for these rims with lockouts...

msgross 01-24-2007 11:23 PM

Re: 15X8 6 lug M/T Classic II in NC
 
good price, I love mine


ttt

70STOVEBOLT 01-25-2007 01:21 PM

Re: 15X8 6 lug M/T Classic II in NC
 
Did you post the pix, I do not see them.

Thanks,
Stovebolt

qksilver 01-25-2007 10:42 PM

Re: 15X8 6 lug M/T Classic II in NC
 
Ttt

qksilver 01-28-2007 08:48 PM

Re: 15X8 6 lug M/T Classic II in NC
 
Ttt

qksilver 01-29-2007 09:24 PM

Re: 15X8 6 lug M/T Classic II in NC
 
Ttt

qksilver 02-02-2007 11:00 AM

Re: 15X8 6 lug M/T Classic II in NC
 
Ttt

ZOOMY 02-03-2007 01:28 PM

Re: 15X8 6 lug M/T Classic II in NC
 
Can you post a pic of the "cut" area ?.....Thanks......Zoomy

qksilver 02-03-2007 10:51 PM

Re: 15X8 6 lug M/T Classic II in NC
 
it is on one of the caps about 1/3 third the way around about 1/2 inch from the tip. It looks like it was done with a hack saw , so the cut is probably about an eight of an inch wide.
I am not sure but I think a new cap runs about 10 bucks
thanks,
Steve

qksilver 02-04-2007 12:52 PM

Re: 15X8 6 lug M/T Classic II in NC
 
Ttt

chevdanbarnett 02-05-2007 12:03 AM

Re: 15X8 6 lug M/T Classic II in NC
 
i like

qksilver 02-07-2007 03:47 AM

Re: 15X8 6 lug M/T Classic II in NC
 
Ttt

qksilver 02-10-2007 08:45 PM

Re: 15X8 6 lug M/T Classic II in NC
 
Ttt

qksilver 02-15-2007 10:09 AM

Re: 15X8 6 lug M/T Classic II in NC
 
Ttt

ToddSS 02-15-2007 02:11 PM

Re: 15X8 6 lug M/T Classic II in NC
 
1. Do they have recesses inside the wheels to clear the big rivets in the front drums? I have a '68.

2. How much to ship to Michigan?

1969k10stepside 02-15-2007 05:40 PM

Re: 15X8 6 lug M/T Classic II in NC
 
I bought the other rims he had,shipping was about $70 shipped to the local pickup,not residential,and residential was around $100.That should give you a idea

qksilver 02-15-2007 11:06 PM

Re: 15X8 6 lug M/T Classic II in NC
 
good question, I have no idea but will be out at the shop Sat. Pm me your zip and I can get you a quote

qksilver 02-17-2007 08:50 PM

Re: 15X8 6 lug M/T Classic II in NC
 
They mount flat on a 68 drum front end

msgross 02-17-2007 09:52 PM

Re: 15X8 6 lug M/T Classic II in NC
 
I have the same rims on my 68 with drums, no issues on front or rear, except that I need the lockout version of the center caps. Check my sig for pics.

ttt for ya

qksilver 02-18-2007 11:24 AM

Re: 15X8 6 lug M/T Classic II in NC
 
Thanks,
Steve


All times are GMT -4. The time now is 03:40 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com