The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - 07 Yukon rims/tires (https://67-72chevytrucks.com/vboard/showthread.php?t=225169)

Dadsredwagon

01-28-2007 11:45 PM

07 Yukon rims/tires

on the 67 forum they show a pic of these rims 6 lug .. would these fit our years?

Thx

mudslinger396

01-28-2007 11:55 PM

Re: 07 Yukon rims/tires

you would have measure the the pattern but it should fit

ghetto_superman

01-29-2007 01:54 AM

Re: 07 Yukon rims/tires

The hub hole in the center of the newer rims will be too small to fit around the large hub on the older axles. both can be machined down.. The bolt patterns are the same, but be aware of the backspacing as well. The new rims have a lot of BS and may rub inner fenders on truck beds, and possibly control arms on the front. I'm not %100 sure about the control arms though. :D

Dadsredwagon

01-29-2007 09:32 PM

Re: 07 Yukon rims/tires

thanks for the info..

SkylineNXS

01-29-2007 11:04 PM

Re: 07 Yukon rims/tires

http://cgi.ebay.com/ebaymotors/ws/eB...7929802&rd=1,1

Does anyone know if these wheels will be even close to fitting a 66? I have not yet gotten the offset from him, but does anyone know what the "max" width of a tire u can put on these trucks, with stock axels? Thanks....

Brad

All times are GMT -4. The time now is 02:21 PM.