Please Help Me Asap!!!
 

I Need To Know The Quickest And Easiest Way To Hook Up A License Tag Light... I Have To Have This Done Asap I Dont Have One, Whats Quickest, Easiest Way To Get One Up And Working???????

Re: Please Help Me Asap!!!
 

well you can get a universal one at wal mart or any chain auto parts store... i would run the lead up to the tail lights and run it off the marker lights if ya dont have any power wire to where your old one used to be... if its a true emergency get them crimp connectors like you would use for a trailer light kit

Re: Please Help Me Asap!!!
 

They sell license plate frames with the light in them.

Re: Please Help Me Asap!!!
 

should there be light for the tag in the bumper it the round hole next to the plate unless it a modded bumper

Re: Please Help Me Asap!!!
 

Like OldRusty said, either Walmart, or some late night store,.....universal light assy, to tail light wire. I think it's the green????????

If it's all out crunch time, look for a old dome light, or just a socket, wire the ground, and one terminal, and let it hang!

Good Luck

Re: Please Help Me Asap!!!
 

well i just need it by friday for an inspection they are going to do on my truck to make sure everything works... i have everything but this am i suppose to have two or just one? my bumper has a place for two but both gone...

Re: Please Help Me Asap!!!
 

I just checked the wiring diagram for a 79, and for that year, it was a brown wire. Now on my trucks, it came out of the connector for all the rear lights. Hope this helps

Re: Please Help Me Asap!!!
 

Most factory bumpers had one of two plate light designs. One had two mounting holes, the other was a 1-1/4" snap-in deal. Both are readily available at most parts stores and probably Walmart. Just tap into the nearest power wire that operates the running lights.

Re: Please Help Me Asap!!!
 

if you have a stock bumper then yes there are two chrome kinds like half moon license plate lights mounted on either side of the plate in the rear bumper... i think you may be able to find some kind of aftermarket to fit there too especially in a big rig parts place if wally world dont have them
ps if you dont have them and they arent operational in addition to failing inspectiion some cops will give you a ticket

Re: Please Help Me Asap!!!
 

I know that most step bumpers used the snap-in half moon style, not sure about the bumper you've got. I'm picturing a single, two-screw mount above the center of your plate. Whether or not you need two is up to your state law. Maine only requires one. Two is better, but will only pass as long as both are operational.

Re: Please Help Me Asap!!!
 

I believe for an inspection you just need to have some sort of light there... i dont believe you need to have both. just as long as you can see the plate at night.

Re: Please Help Me Asap!!!
 

got her all fixed up cost me a whole $6.00 thanks!!

Re: Please Help Me Asap!!!
 

Take off the bumper or looke under the drivers side corner you will see the factory bracket and it will have the factory light. there will be a wire which goes to a conector and that will be the power for your new lights. or juct take the bumper off and mount the plate. to give you a better idea of were it is look at my picture. all trucks came with this from the factory as far as i know I did not even know it was there till i removed my bumper. and my 85 had one too so it was factory

Re: Please Help Me Asap!!!
 

It's a brown wire for pretty much all years i believe for the marker circuit. Only one light is required.

Re: Please Help Me Asap!!!
 

who's doing an inspection?

Re: Please Help Me Asap!!!
 

i had to have someone inspect everything on it to make sure it all worked good and i knew this one thing didnt work it was for my 73 c20 i got her fixed... goin to the dealership tomorrow and shes gettin fresh tune up.. (got connections) shes been sittin for too long

Re: Please Help Me Asap!!!
 

PICS of the 73?????????????

Re: Please Help Me Asap!!!
 

yeah should be some in some of my posts some where

Re: Please Help Me Asap!!!
 

a tune-up is so easy on these things, it ain't even worth driving to the dealership for

Re: Please Help Me Asap!!!
 

Oklahoma doesnt have any inspections. What inspection are you having to go through? Or did they recently, in the last 2 months, bring them back? I use to live there, moved Dec 06.

Re: Please Help Me Asap!!!
 

nope, no inspections

Re: Please Help Me Asap!!!
 

no inspections and its not a state inspection... i took it there because i cannot flush my tranny or brakes as quickly and easy as they can (hook to machine) plus all it cost me was $50 bucks and i got oil change, plugs, wires, etc etc and i got tranny and brakes flushed everything is all fixed up now...