help me find a tool please
 

I am looking for a certain tool. its a set of brass pins that you place between the plug wire and tower so you can then use a test light to short the spark to ground. they come is a set of 6 but one of mine has decided to walk away some time within the last 6 years or so. (dont ask, bad memories of past fellow techs borrowing tools) I would like to find another set so I can then do an 8 cylinder without monkey rigging rivets and vacuum tube.

the ones I have dont say anything at all as to who makes them.
I will take some pics of what I have and post them later if that will help.
Thanks in advance

Re: help me find a tool please
 

No idea where to get them but they would be handy. I just stick the end into the boot.

Re: help me find a tool please
 

guessing here but maybe northern tool would have something like that or JC Whitney that seems like something that would be up their alley oddball or hard to find tools

Re: help me find a tool please
 

shouldn't be that hard to fabricate

Re: help me find a tool please
 

im having trouble searching it but otc, kent moore used to make one that has 2 sets of 4 leads attached to adjustable board you could hook up 8 wires and watch spark real good on DIS stuff