The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   WTT: My 69 gmc 2500 for a built motor (oregon) (https://67-72chevytrucks.com/vboard/showthread.php?t=230047)

redhead69 03-04-2007 06:56 PM

WTT: My 69 gmc 2500 for a built motor (oregon)
 
I am looking for a performance motor for my street/strip short bed. The bigger the better and will add money for the right motor.

The Gmc is a factory 396/400, bucket seats, radio delete, ps, pb, cab roof lights. Its now a Target master 350/350 with a bench. Its got surface rust in the bed and thru rust on the passenger front fender tip (you all know where) and drivers rocker. Its never been repainted, so what you see is what you get. It runs and drives good, no knocks or smoke, shifts good. Needs a choke hooked up, roof lights dont work. Everything else works good. Good project or work truck. Still has the big block towers and radiator. I've got the bucket seats out and am puting them in my short bed, but if youve got the right motor we could work them back in to the deal. The bench seat is near perfect though and the buckets would need recovered. Anybody interested? Heres a few pics, tried to show the worst..
http://i7.photobucket.com/albums/y25...c/100_1922.jpg
http://i7.photobucket.com/albums/y25...c/100_1967.jpg
http://i7.photobucket.com/albums/y25...c/100_1968.jpg
http://i7.photobucket.com/albums/y25...c/100_1970.jpg
http://i7.photobucket.com/albums/y25...c/100_1971.jpg
http://i7.photobucket.com/albums/y25...c/100_1918.jpg
http://i7.photobucket.com/albums/y25...c/100_1917.jpg

Reply to thread, local p/u only.. will sell outright (pm if interested in that) thanks for looking everybody!

eric

Mt Man Chad 03-06-2007 12:22 AM

Re: WTT: My 69 gmc 2500 for a built motor (oregon)
 
How much $ are you looking to get for the truck?

Cheers
Chad

CrashEd 03-06-2007 12:48 AM

Re: WTT: My 69 gmc 2500 for a built motor (oregon)
 
are you looking for a 402 bigblock for your truck.
# matching 310 horse all brackets ac too
Never mind just looked at location LOL!! didnt register first.
way to far for me.

redhead69 03-06-2007 01:18 AM

Re: WTT: My 69 gmc 2500 for a built motor (oregon)
 
Chad- Id sell it for 1,000 without the buckets.
Crasged- You are really far away, is this a drop in and go motor?

CrashEd 03-06-2007 05:53 AM

Re: WTT: My 69 gmc 2500 for a built motor (oregon)
 
I could drive the truck with the 402 in it out there.But its way to far for me to go. been driving it around here and it has lots of power its kind of growing on me. iv never had a bigblock truck. It runs better than my 383 smallblock in my blazer and that little motor is mean

redhead69 03-10-2007 05:42 PM

Re: WTT: My 69 gmc 2500 for a built motor (oregon)
 
ttt..offers?


All times are GMT -4. The time now is 04:09 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com