Any Intrest in 86 front end parts??? And 91 suburban parts.
 

I am in the process of converting to a 91 sub front end and I will have the fenders, hood, inner fenders from the suburaban and the core support, headlights, and grille from the 86 K10. The drivers side fender has a dent that can be fixed and the hood and passenger side fender are in good shape. Are the parts worth any thing?? If they aren't worth $150 or so I will keep them for spares incase I ever have a wreck. Just curious. I will also have a lot of parts from the sub that I dont need like some of the a/c stuff, box that attaches to the firewall and what is under the dash. I will use most of the lines under the hood so I can convert to the serp setup. The sub has a nice tan dashpad that has only one crack that is on the drivers side speaker holes that is about a inch long. I will also have the doors, front and back, rust free, rear gate and glass, 2nd row seat and 3rd(tan), overhead console, floor 4wd shifter, and door panels. I am sure there will be more, let me know if anyone needs pics.
Thanks, Kade

Re: Any Intrest in 86 front end parts???
 

I need the outer grille trim next to the passenger side headlights, not the bezel but the trim that surrounds them and the grille and a drip rail from the driver's side for a pickup. Dome light cover, and ash tray, the part that pulls out. Have any of thoose?

Re: Any Intrest in 86 front end parts???
 

Does this have a high hump trans tunnel? I need a section of floorboard to modify my 2wd cab.

Re: Any Intrest in 86 front end parts???
 

I have the trim piece, and the ashtray. It will be another week before I pull the front end off the 86 before I have the trim piece. I will let you know when I get it off and get you some pics.
Thanks, Kade

Re: Any Intrest in 86 front end parts???
 

How do you tell if it has the high hump?? It has the 4x4 shifter in the hump.
Thanks, Kade