Early Classic Enterprises
 

A-1 All the way. Ask for Stan. Tell him that Corey referred you. They can assemble a custom front-end rebuild kit for 1/2 or 3/4 ton, and help you with tech. info.

early classic enterprises a-1 quality
 

top notch quality

good stuff to know
 

i plan on getting my lowering kit from them in the next few months...glad to hear good stories...

i'm backing them up too. been there twice at there shop. first time i arrived right when they were closing but they stayed open till i got there and i got all my parts. i've order two front end rebuilt kits, two 4/6 lowering kits, 5-lug rear axles. and a cowl hood that they held on too for a few months cause i could not get over there. great set of poeple working there.:bowtie: :flag:

Ordered GenIII swap kit from them today. Cart was easy to use and I got right through to sales afterwards to confirm some questions I had about the order. Top notch!

I got a set of their drop spindles and have no complaints.

I ordered a lock set for my Blazer (I'm a sucker for one key that unlocks it all) along with an assembly book on their website. I put in the wrong zip code and they called me that day for clarification and they still got the order out the same day.

UPS ground shipping (from Southern to Northern CA) got me the items the next day!! :cool:

I plan on ordering the billet gas cap, and if it gets here in 1-2 days, it will come in right on time with my gas tank/other stuff

any of teh california guys go to their location in fresno? can you buy stuff straight from there?

Yes, first time I bought from them i went to there shop. I left early in the morning and got lost when i got there. Called them up for direction and They stayed at the shop till we got there, we got there when they were suppose to close. great set of guys.

o sweet, if I ever need anything fast, its a 1 day trip there and back...I think im gonna end up buying my rear leaves/front disk kit from there

I got all my disk brake/drop spindles there and the parts are great. the tech support is awsome also! I drove down there and picked it all up and when I put on the rotors one had a defect. They use quality brake parts....all Raybestos.... one of the studs was misalgined so i called them up and they had a new one at my door the next day free! :metal:
They have 10% off all phone orders thru today also!

I requested a catalogue and they sent it right out! Wish I could say more,someday my project will be riding on their stuff.

Re: Early Classic Enterprises
 

Purchased my GenIII motor mount kit (for my LS1) through them. Delivery took a little longer than I expected (~8 days total) but their support department was eager to help when I saw the lack of directions in the box. The part fits great and it was really common sense on how to install them, but I had to be sure about it, so I called.

Great parts. Great guys. I will order again.

Re: Early Classic Enterprises
 

ABSOLUTELY excellent to deal with!
They will be my first-stop for anything I need for my truck!
Very helpful, and even when web-ordering, I'll sometimes get a call with a quick question of "Hey, I see you're getting such and such, had you considered this and that?"
At any rate, they've saved me a ton of ordering errors, and a ton of cash!
I'll give them 5 stars!
:metal:

Re: Early Classic Enterprises
 

i bought a set of 6 lug disc brake rotors from them.... top quality!

Re: Early Classic Enterprises
 

Agreed, they have great service and really know thier stuff... Most of my new parts are from them, and I usually have it within 24 hours...

Re: Early Classic Enterprises
 

You can read what I have to say about them here...
http://67-72chevytrucks.com/vboard/s...d.php?t=123689
I'm too lazy to type it again!

Re: Early Classic Enterprises
 

excellent products ,great customer service

Re: Early Classic Enterprises
 

Yes, these guys are top notch. They've sent me great quality parts, fast, with excellent phone support. I must say, the guy who boxes up the parts and sends them out definetely takes pride in his work. Everything is always very well packed with plenty of padding, the boxes are taped and stapled, even the shipping lables are on strait. Taking pride in your work like that says a lot to me about the company and the people. If I ever have the opportunity to meet these guys, I'm buyin' em a 12 pack:metal:

Re: Early Classic Enterprises
 

I live about 5 miles away from Early Classics and I know Dave Clark. Dave has by far the highist quality parts you can buy for you 1960 to 1972 Chevy truck. They do not sell cheap junk! I have had a few 1972 short beds and used alot parts from him. All of the kits they sell are complete kits down to every nut, bolt and washer....no hunting around for bolt that fits or re-using 30 year old bolts. I just wish they would start sell parts for the 55 to 59 Chevy's, becuase I would do all of my bussiness with them.

Re: Early Classic Enterprises
 

I agree, Been using them for years, When you call them, they don't just want to get you off the phone, they want to talk about your truck and offer help where they can - best Vendors in our industry - Bar F'en none -

Some one should send them a copy of this thread...... Just as an appreciation.

Re: Early Classic Enterprises
 

I've talked to Mark on a couple of occasions and he's always very helpful and really seems interesed in getting you what you need