The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Power Window Motor replacing (https://67-72chevytrucks.com/vboard/showthread.php?t=233126)

dacanuck

03-25-2007 04:41 PM

Power Window Motor replacing

My driver's side window no longer goes down, luckily it stopped working when it was all the way up! Can I replace the motor without removing everything?

swervin ervin

03-25-2007 05:36 PM

Re: Power Window Motor replacing

Here you go.

http://www.73-87.com/7387garage/interior/winmotor.htm

72CSTC5

03-25-2007 11:16 PM

Re: Power Window Motor replacing

You have to removed the trim panel and then dig deep in the door to unplug the harness connector and then pull the regulator and motor out and swap and reverse with everything back in.

caramaro

08-31-2013 12:12 PM

Re: Power Window Motor replacing

great thread thank you

Malo83

08-31-2013 07:01 PM

Re: Power Window Motor replacing

Wow! what a coincidense, getting ready to swap out my window motors and 6yrs later, where's Swerve ???

All times are GMT -4. The time now is 07:40 AM.