Steering column bearing grease ?
 

I dis-assembled my tilt column lower bearing assm to clean it, as I could feel it grinding. Anyway, what kind of grease should I repack the bearing with?
some type of bearing grease or would white
lithium be ok....The bearing seems to be
in good shape, after the remove of grime.
Thanks.


------------------
71 Chevy C-10 SWB Fleetside WAS:307w/3-on-the-tree NOW:350TBI/700R4/3.73
See it at www.prismnet.com/~grzanich

chassis or bearign grease would be good, wil stick and not go anywhere, especially hi temp disc braske wheel bearign grease, thats what I owuld use since i alreayd ahve the stuff sitting around anyways


------------------
-71/C-10(thx teeitup and crews!)350 4+4/CH465(thx 71Chev, GMCPaul, and CPNE)longfleet bed(thnx meathead95)!still building it-
-'84 Z28(Z28) 1G1AP87GXEL100000 with H.O. 305/4bbl/190net/hp(L69) 3.73 rear(GT4/YC4) 700R4(MD8-MXO) & other goodies :)
-79 G20 pass van, 350/th350/10bolt,
paint is overrated
Randy- Lincoln, IL

r68c30@hotmail.com
© RSS Enterprises 2000

my new bearing came packed with wheel bearing grease

------------------
71 basic C-10 350. The only option is the rust.No nothing on it, but thats all about to change. <A HREF="http://www.geocities.com/stevemau/slam33page.html?1004806705410

" TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410

</A>

Cool, thanks guys....bearing grease it is then!

I use the Slick 50 synthetic grease its water proof and seems to be slicker........my 2 cents

------------------
68 c20 in progress 327 TH400 tach dash Disc Brakes and soon 3.90 rear gears.. have many new parts now just need the time..... Sound Familar