88 Chevy truck parting out
 

I've got a 88 Chevy truck that I need to get rid of. I'm keeping the motor and possibly the tranny rest has to go.
1) Drivers side taillight. $15
2) Tailgate, has some dents. $50
3) Gauge cluster, bar style. $20
4) Steering collumn, Tilt is loose but rest is in nice shape, has key. $25
5) Steering wheel. $25
6) outer fenders, $100 for the pair prefer pickup
7) 350 motor mounts frame side $25
8) 700r4 crossmember $20
9) rear end assembly $100 pick up only
10)Rear springs. $30
11)Front springs. $25
12)All interior plastics, no dash $75, prefer pick up
13)Dash, missing the center vent piece and ashtray, blue color. $75 perfer pickup
14) Complete rolling frame, $200
Can get pictures of parts. Truck is in NW Iowa.

Re: 88 Chevy truck parting out
 

Cruise servo good? Does it have pull straps on the door panels?

Re: 88 Chevy truck parting out
 

The servo is gone, the door panels didn't have pull straps.

Re: 88 Chevy truck parting out
 

This truck doesn't happen to have the plastic grills covering the rear speakers did it?

this would be found on trucks that didn't come with the rear panels, such as W/T or Cheyenne

Re: 88 Chevy truck parting out
 

It is a Cheyenne but the panel goes all the way from the floor to the roof.

Re: 88 Chevy truck parting out
 

need prices on:

hood release handle/cable

gauge cluster surround (black peice around gauges, heater control, radio, held on by 4 torx bolts)

headlight switch (screws to back of black surround)

brake controller

this is a weird one-- theres a peice in the center of the dash, little metal thing, goes behind the tape deck. it is what supports the back of the tape deck. has a hole that a plastic peg on the deck goes in

thanks!

Re: 88 Chevy truck parting out
 

If he doesn't have it, let me know, as i think i do. :)

Re: 88 Chevy truck parting out
 

Blue 71- I have everything except for the cassette deck bracket, The headlight switch and hood release show some wear but both work.
$70 shipped on everything soud resonable?

Re: 88 Chevy truck parting out
 

I need the plastc piece that glove box lid swing on that is covered by the dash center piece.

Re: 88 Chevy truck parting out
 

How much for the Chevrolet horn button shipped to 58401?

Re: 88 Chevy truck parting out
 

How much for headlights,headlight buckets,mounting screw's and spring's and headlight wiring harness? 37891 Whitesburg,TN.
Thanks
Roger

Re: 88 Chevy truck parting out
 

How much for the dash pad? the narrow pad around the gauge cluster. Is it in good shape,no cracks?
Thanks
Roger

Re: 88 Chevy truck parting out
 

I want to sell that with the wheel, $25 shipped on that

Re: 88 Chevy truck parting out
 

This is the piece that goes over the top of the gauge cluster? It has a couple of cracks on it.

Re: 88 Chevy truck parting out
 

I have the L shaped piece that holds the glovebox hinge. $10 shipped.

Re: 88 Chevy truck parting out
 

The harness has a taped spot on the drivers side, not sure if this was factory or not. $60 shipped for everything.

Re: 88 Chevy truck parting out
 

How about whats left of front seat shipped to 64055?

Re: 88 Chevy truck parting out
 

The front seat would cost more to ship than it would be worth, come pick it up you can have it for free. From past dealings shipping would be around $200.

Re: 88 Chevy truck parting out
 

Headlights and wiring harness sold

Re: 88 Chevy truck parting out
 

Speed, if 93Z71 hasn't responded or isn't showing interest, I'd really appreciate that piece for the glove box hinge.

Mine doesn't have it at all, so I have no idea what I need. All I know is my glove box door can come completely out because the left side has nothing to grab on to. So I guess I need whatever makes up the hinge that the door pin goes into. If that's what you have, then I'll have the money for a paypal transfer tomorrow.

Darrin

Re: 88 Chevy truck parting out
 

I'll give 93Z71 till tonight, do not hear from him again on the piece, it's yours.

Re: 88 Chevy truck parting out
 

Where in NW Ia are you? I could use a few things. Grill, Wiper motor/card, steering column. Does it have door pulls?...

Re: 88 Chevy truck parting out
 

I'm in Terril, the truck is about halfway between Terril and Spencer. I have the grill, it has a crack on the drivers side. The wiper motor works, tested it before I pulled it off. The collumn is complete but the tilt is loose, I could possibly tighten it up as soon as I can get some free time. Sorry no door pulls.

Re: 88 Chevy truck parting out
 

Will also take $500 obo for the truck without drivetrain or front clip. Will include a TH350 with the truck.

Re: 88 Chevy truck parting out
 

Any body else? Time is running out before it goes to the crusher later this week.