The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 99-06 GMT800 Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=58)
-   -   Wiper arm removal!! (https://67-72chevytrucks.com/vboard/showthread.php?t=236108)

xtreme80 04-13-2007 01:56 PM

Wiper arm removal!!
 
Can anyone tell me real quick how to remove the entire driver side wiper arm on a 1999 Chevy 2500 work truck?

There is a cover on the gear that looks like it should just pop off, but it won't budge.

Thanks!

87 STEPPER 04-14-2007 03:03 PM

Re: Wiper arm removal!!
 
To remove the wiper arm.

1 Mark the position of the wiper blade on the windshield with some masking tape.

2 Remove the washer hose.

3 Lift the wiper arm from the windshield.

4 Disengage the retaining latch/tab @ the base of the wiper arm with a screwdriver outward.

5 Remove the wiper arm from the transmission drive shaft/post.

6 Reverse the proceedures above to reinstall using the tape mark on the windshield as your alignment referance.

xtreme80 04-14-2007 07:40 PM

Re: Wiper arm removal!!
 
dammit! I was so close! I was afraid I wasn't supposed to bend those tabs though, and didn't wanna break anything.

thanks for the info.


All times are GMT -4. The time now is 08:41 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com