Tailgate Panel Removal - Need Guidance Please
 

Hello,

I need to advise a friend on how to remove the tailgate trim panel without damaging it. I have attached a photo so you can see the type of panel I am referring to. Could you fine folks advise me on what needs to be done to remove it?

Thank You,
Bob

Re: Tailgate Panel Removal - Need Guidance Please
 

if i remember right there is a tool made by motormite on red cards in most auto parts stores with the name HELP on it and they make a tool which compresses the clips... Sometimes you can just push up on it and then pull it away from the tailgate too..

Re: Tailgate Panel Removal - Need Guidance Please
 

Do you have to remove the panels on the tailgate to access the clips?

Re: Tailgate Panel Removal - Need Guidance Please
 

Are there screws on the inside of the 'gate holding it on?

On the larger panels, like on the '77 gate I have, there were long screws going thru the gate that held the panel on.

Re: Tailgate Panel Removal - Need Guidance Please
 

Unlesss GMC mounts differently than the 3 Chevrolet tailgates that I have , there are between 3 to 5 screws on the inside if the tailgate that hold it on . Mine have torx heads . Frank

Re: Tailgate Panel Removal - Need Guidance Please
 

Thanks guys.