The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   Truck Parts (https://67-72chevytrucks.com/vboard/showthread.php?t=240064)

72armyswbtruck 05-08-2007 08:15 AM

Truck Parts
 
5 Attachment(s)
OK, I have found a guy locally that has a ton of body parts. Fenders, doors, etc. Here are some pics. I can deliver to the Northwest in June. Idaho to Oregon to Washington. Fenders are $75, doors $75, Cowls $15, or make an offer on the entire collection. He is pretty open. Again not my stuff just trying to pass on these parts before he sends them to the scrap.

72armyswbtruck 05-08-2007 08:17 AM

More Pics
 
5 Attachment(s)
Even more pics

72armyswbtruck 05-08-2007 08:18 AM

Even More Truck Parts
 
5 Attachment(s)
And more pics.....

72armyswbtruck 05-08-2007 08:19 AM

Last Pics
 
4 Attachment(s)
Last Pics

72armyswbtruck 05-08-2007 08:22 AM

More Body Panels
 
OK, He also has some cabs with titles. Pretty thrashed but rebuildable. He wants too much money for the cabs $500 or so each. However, I think that he would take about $250 to $300 for them. I can get more pics on request.

jorgensensc 05-08-2007 08:28 AM

Re: Truck Parts
 
Wow! I could use a driverside fender and a outer grill for a 72 that has no rust! Would you be willing to check on that? If you could ship it for me I could hopefullythrow in a little something for your time.
Shawn

CUSTOM/10 05-08-2007 09:03 AM

Re: Truck Parts
 
Any SWB Fleet beds or bed sides ???

Gary

72armyswbtruck 05-08-2007 09:12 AM

Re: Truck Parts
 
Sorry, he used all of them up and the ones that he has left are patched up with fiberglass?????

Inthuwind 05-08-2007 09:44 AM

Re: Truck Parts
 
Will he ship? I need a '68 passenger fender with no rust?!?!? Are they out there?? LOL

1lowdiesel 05-08-2007 11:06 AM

Re: Truck Parts
 
damn i need a 67-68 hood obviously no rust if he will ship if not no problem.

72armyswbtruck 05-08-2007 03:07 PM

Re: Truck Parts
 
Shipping is possible, I will try and get better pics of the parts in question. The hood would be pretty expensive to ship. I know that the fenders can go Fedex and Greyhound. Lots of packaging material. I am not in this for the money, he is trading me parts and space in his soon to be empty shop.

72armyswbtruck 05-08-2007 03:07 PM

Re: Truck Parts
 
Quote:

Originally Posted by 1lowdiesel (Post 2164288)
damn i need a 67-68 hood obviously no rust if he will ship if not no problem.

I can check on shipping, probably pretty spendy however.

72armyswbtruck 05-08-2007 03:08 PM

Re: Truck Parts
 
Quote:

Originally Posted by Inthuwind (Post 2164202)
Will he ship? I need a '68 passenger fender with no rust?!?!? Are they out there?? LOL

They are out there and I could try and ship, Greyhound, Fedex? I will work on pics and price...

72armyswbtruck 05-08-2007 03:09 PM

Re: Truck Parts
 
Quote:

Originally Posted by jorgensensc (Post 2164117)
Wow! I could use a driverside fender and a outer grill for a 72 that has no rust! Would you be willing to check on that? If you could ship it for me I could hopefullythrow in a little something for your time.
Shawn

I will check on the driver side fender. And on shipping. Hopefully I can get better pics for you later this week.
Army

jorgensensc 05-08-2007 04:01 PM

Re: Truck Parts
 
Thanks !!! I look forward to it. The fender shouldn't be more than 35. via Fedex to ship, (I just mailed a tailgate (55lbs) and a set of trailing arms (67 lbs) and they were about 35 each fedex. I also shipped a Bel Air hood via greyhound for 85.00 and got it the next day.
Shawn

72armyswbtruck 05-08-2007 04:45 PM

Re: Truck Parts
 
Quote:

Originally Posted by jorgensensc (Post 2164596)
Thanks !!! I look forward to it. The fender shouldn't be more than 35. via Fedex to ship, (I just mailed a tailgate (55lbs) and a set of trailing arms (67 lbs) and they were about 35 each fedex. I also shipped a Bel Air hood via greyhound for 85.00 and got it the next day.
Shawn

WOW, even with it being so large?

jorgensensc 05-08-2007 04:52 PM

Re: Truck Parts
 
THe hood? Yes, all you have to do for Greyhound is hose it off, and wrap the sharp edges. i could have paid 65.00, but it would have taken 7 days, so I opted for the extra 20.00. That was from Minnesota to Houston. As for the stuff for Fedex, I just taped cardboard boxes around it and mailed it.
Shawn

72armyswbtruck 05-08-2007 07:28 PM

Re: Truck Parts
 
OK, I have used them before, however, I was just wondering about dents or dings...

69RAT 05-08-2007 10:22 PM

Re: Truck Parts
 
Where are you at? Looks like a place I bought some parts from years ago outside Boise.
Price on no hole cowl, metal door panels.
Might be down there end of May (#3 son's graduating), we'll have to get together.

Thanks
Roger

Huskerboy2 05-08-2007 10:35 PM

Re: Truck Parts
 
I would take a nice 68 driver's side fender. I'm in Austin, TX.

72armyswbtruck 05-08-2007 11:03 PM

Re: Truck Parts
 
Quote:

Originally Posted by 69RAT (Post 2165300)
Where are you at? Looks like a place I bought some parts from years ago outside Boise.
Price on no hole cowl, metal door panels.
Might be down there end of May (#3 son's graduating), we'll have to get together.

Thanks
Roger

I am in Nampa, He just moved into this shop a couple of years ago. Wish that there was a no hole cowl. I have a set of blue 71 metal door panels. How much you thinkin, pics available and I can hold them until you get there.
Army

72armyswbtruck 05-08-2007 11:03 PM

Re: Truck Parts
 
Quote:

Originally Posted by Huskerboy2 (Post 2165314)
I would take a nice 68 driver's side fender. I'm in Austin, TX.

I will try and get more pics on Thursday

BAD4X4 05-08-2007 11:11 PM

Re: Truck Parts
 
army I need pass and drivers front fenders in awesome shape hopefully top and btm chrome, Let me know. Thanx Dana

72armyswbtruck 05-08-2007 11:17 PM

Re: Truck Parts
 
What years specifically? And I will get better pics. Most of these are not rusted thru on the bottom and with just a few minor dings. I can also deliver these for you in June if you can assist with a little gas money.

72CSTC5 05-08-2007 11:20 PM

Re: Truck Parts
 
How much is he asking for Doors?


All times are GMT -4. The time now is 06:36 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com