ok i need to fidn suspension parts for my 84
 

which company out there has quality stuff, but isnt going to bak rupt me doing it..
i got my 84 3/4 gmc, 454..

i have for gotton the priceing i did a couple yrs ago but if i rember right it is about 3 to 400 per side? or was it 400 for both sides..like i said i forget..i need everything to do a complete rebuild on the front end.. i also need a right side upper control arm/ A arm..i have found out that is my problem on the right side, the bushing have been gone for a while and the holes are wallowed out bad. this is all so why i am not driving it to much, because the right front wheel should have fallen off by now, and there is no reason to keep tempting fate...

anyway i just ned a good place to deal with on a limited budget, but i definatly need to get it done..
thanks for any info..
billy

Re: ok i need to fidn suspension parts for my 84
 

I used these guys a few years ago when i did my S10 front end all the parts were top quality but it wasn't a complete set like they said i still had to get the outter tierods and the center link or drag link what ever you like to call it locally.

http://www.p-s-t.com

I used the polygraphite set but if i were to do it over i'd use the standard set the poly set made the ride too stiff and even tho i used the lube i squeaked alot.

As for your A frame i'd go to the junk yard for that and i'd also get the cross shaft too cuz it's probably wasted too.

Re: ok i need to fidn suspension parts for my 84
 

These guys have everything you need
http://www.classicparts.com

Re: ok i need to fidn suspension parts for my 84
 

i use moog parts for all my front end work i have used them for years with stellar results. I get em at my local NAPA

Re: ok i need to fidn suspension parts for my 84
 

I went all Moog on mine as well. They were all in stock at O'Reilly Auto Parts. Summit Racing carries them, too. They don't list them all in the catalog, but I think they stock them.

Buying a kit like 87STEPPER suggested is probably cheapest, but I have no experience with that.

Slonaker

Re: ok i need to fidn suspension parts for my 84
 

ok thanks for the info ya'll...hopefully in the next month i can start getting the parts to mak my truck road safe again..since i sold my business last august, i havent put 50 miles on my truck..she semi retired,,lol, but thanks, i miss driving my pig...

Re: ok i need to fidn suspension parts for my 84