WTB Short Water Pump 3 groove crank and 2 groove WP pulleys
 

Here's the whole ordeal:

http://67-72chevytrucks.com/vboard/s...d.php?t=243551

Basically I now have the correct alternator brackets and short water pump, but I have the wrong pulleys!

I need a 3 groove crank pulley and a 2 groove water pump pulley off of a short water pump truck. Apparently the crank pulley needs to be flush with the balancer (see thread above.) I'd prefer that this stuff comes directly off a junk motor or that you are 100% sure the ones in your parts bin are the ones I need, because I honestly don't know/can't tell just by looking at them and I have nothing to go by :( Please, no bent pulleys and no serious rust. I just "broke the bank" on a vintage air kit, so please go easy on price/shipping if possible :)

ALSO! When I went to install my waterpump NONE of my bolts fit. (I had a long water pump on the truck.) 3 are way too long and one is too short. I have NO parts vehicles or parts bins (I live in a friggin apt.) so if someone can pull the 4 bolts out of a junk short water pump motor, I'd be greatly appreciative. I think there should be two short bolts, a kind of medium one, and one long one, if that helps?


I could really use someone's help :)

Re: WTB Short Water Pump 3 groove crank and 2 groove WP pulleys
 

Thanks for all the help and PM's! I now have what I need soon to be on the way!

Re: WTB Short Water Pump 3 groove crank and 2 groove WP pulleys
 

Re: WTB Short Water Pump 3 groove crank and 2 groove WP pulleys
 

Another one
http://cgi.ebay.com/ebaymotors/SMALL...37967541QQrdZ1